D-Link Web Smart Switch DGS-1210-16 Reference Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Switch
  5. Web Smart Switch DGS-1210-16
  6. Reference manual

D-Link Web Smart Switch DGS-1210-16 Reference Manual

Web ui reference guide web smart switch series
Hide thumbs Also See for Web Smart Switch DGS-1210-16:
Table of Contents

Quick Links

See also: Reference Manual
Table of Contents
loading

Related Manuals for D-Link Web Smart Switch DGS-1210-16

Summary of Contents for D-Link Web Smart Switch DGS-1210-16

  • Page 2 Reproduction in any manner whatsoever without the written permission of D-Link Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

  • Page 3: Table Of Contents

    Table of Contents D-Link Web Smart Switch User Manual Table of Contents Table of Contents ............................. i Intended Readers ............................. 1 Terms/Usage ..............................1 Safety Instructions ............................1 General Precautions for Rack-Mountable Products ..................2 Protecting Against Electrostatic Discharge ....................3 Product Introduction ..........................
  • Page 4 Table of Contents D-Link Web Smart Switch User Manual Tool Bar > Smart Wizard ..........................22 Tool Bar > Online Help ..........................22 Function Tree ............................... 23 Device Information ............................ 23 System > System Settings ........................24 System > Password ..........................25 System >...
  • Page 5 Table of Contents D-Link Web Smart Switch User Manual Security > Port Security ..........................63 Security > DoS Attack Prevention ......................64 Security > Traffic Segmentation ....................... 65 Security > Safeguard Engine ........................66 Security > Storm Control .......................... 66 Security >...
  • Page 6 Table of Contents D-Link Web Smart Switch User Manual Fast Ethernet Technology .......................... 100 Switching Technology ..........................100 Appendix B - Technical Specifications ..................... 101 Hardware Specifications ..........................101 Key Components / Performance ......................101 Port Functions ............................101 Physical & Environment ......................... 101 Emission (EMI) Certifications .........................

  • Page 7: Intended Readers

    錯誤! 找不到參照來源。 D-Link Web Smart Switch User Manual Intended Readers This guide provides instructions to install the D-Link Gigabit Web Smart Switch DGS-1210-16/24/48, how to configure Web-based Management step-by-step. NOTE: The model you have purchased may appear slightly different from the illustrations shown in the document.

  • Page 8: General Precautions For Rack-Mountable Products

    Product Introduction D-Link Web Smart Switch User Manual An object has fallen into the product. The product has been exposed to water. The product has been dropped or damaged. The product does not operate correctly when you follow the operating instructions.

  • Page 9: Protecting Against Electrostatic Discharge

    Product Introduction D-Link Web Smart Switch User Manual • Systems are considered to be components in a rack. Thus, "component" refers to any system as well as to various peripherals or supporting hardware. • Before working on the rack, make sure that the stabilizers are secured to the rack, extended to the floor, and that the full weight of the rack rests on the floor.

  • Page 10: Product Introduction

    D-Link Web Smart Switch User Manual Product Introduction Thank you and congratulations on your purchase of D-Link Web Smart Switch Products. D-Link's next generation Web Smart Ethernet switch series blends plug-and-play simplicity with exceptional value and reliability for small and medium-sized business (SMB) networking. All models are housed in a new style rack-mount metal case with easy-to-view front panel diagnostic LEDs, and provides advanced features including network security, traffic segmentation, QoS and versatile management.

  • Page 11: Dgs-1210-16

    16-Port 10/100/1000Mbps plus 4 SFP Slot Web Smart Switch. Front Panel Figure 1.1 – DGS-1210-16 Front Panel Power LED : The Power LED lights up when the Switch is connected to a power source. Port Link/Act/Speed LED (1-20): The Link/Act/Speed LED flashes, which indicates a network link through the corresponding port.

  • Page 12: Rear Panel

    Product Introduction D-Link Web Smart Switch User Manual Port Link/Act/Speed LED (1-28): The Link/Act/Speed LED flashes, which indicates a network link through the corresponding port. Blinking indicates that the Switch is either sending or receiving data to the port. When a port has an amber light, this indicates that the port is running on 10M or 100M. When it has a green light it is running on 1000M.

  • Page 13: Rear Panel

    Product Introduction D-Link Web Smart Switch User Manual Rear Panel SWITCH GND AC LINE 100-240 VAC 50-60 Hz 2A MAX Power Cord Clip Figure 1.6 – DGS-1210-48 Rear Panel Power: Connect the supplied AC power cable to this port. Security Lock: Provide a Kensington-compatible security lock to be able to connect to a secure immovable device.

  • Page 14: Hardware Installation

    D-Link Web Smart Switch User Manual Hardware Installation This chapter provides unpacking and installation information for the D-Link Web-Smart Switch. Step 1: Unpacking Open the shipping carton and carefully unpack its contents. Please consult the packing list located in the User Manual to make sure all items are present and undamaged.

  • Page 15: Step 3: Plugging In The Ac Power Cord With Power Cord Clip

    Hardware Installation D-Link Web Smart Switch User Manual Then, use the screws provided with the equipment rack to mount the switch in the rack. Figure 2.3 – Mount the Switch in the rack or chassis Please be aware of following safety Instructions when installing: A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient.
  • Page 16 Hardware Installation D-Link Web Smart Switch User Manual Figure 2.4 – Insert Tie Wrap to the Switch B) Plug the AC power cord into the power socket of the Switch. Figure 2.5 – Connect the power cord to the Switch C) Slide the Retainer through the Tie Wrap until the end of the cord.
  • Page 17 Hardware Installation D-Link Web Smart Switch User Manual D) Circle the tie of the Retainer around the power cord and into the locker of the Retainer. Figure 2.7 – Circle around the power cord E) Fasten the tie of the Retainer until the power cord is secured.

  • Page 18: Power Failure

    Hardware Installation D-Link Web Smart Switch User Manual Figure 2.9 – Plugging the switch into an outlet Power Failure As a precaution, the switch should be unplugged in case of power failure. When power is resumed, plug the switch back in.

  • Page 19: Getting Started

    This chapter introduces the management interface of D-Link Web-Smart Switch. Management Options The D-Link Web Smart Switch can be managed through any port on the device by using the Web-based Management. Each switch must be assigned its own IP Address, which is used for communication with the Web-Based Management or a SNMP network manager.

  • Page 20: Login Web-Based Management

    English. Figure 3.3 – Logon Dialog Box Smart Wizard After a successful login, the Smart Wizard will guide you through essential settings of the D-Link Web Smart Switch. Please refer to the Smart Wizard Configuration section for details. Web-based Management By clicking the Exit button in the Smart Wizard, you will enter the Web-based Management interface.

  • Page 21: Configuration

    Configuration D-Link Web Smart Switch User Manual Configuration The features and functions of the D-Link Web Smart Switch can be configured for optimum use through the Web-based Management Utility. Smart Wizard Configuration After a successful login, the Smart Wizard will guide you through essential settings of the D-Link Web Smart Switch.

  • Page 22: Password

    Configuration D-Link Web Smart Switch User Manual Password Type the desired new password in the Password field and again in the Confirm Password field, then click the Next button to the SNMP setting page. Figure 4.2 – Password in Smart Wizard...

  • Page 23: Snmp

    Configuration D-Link Web Smart Switch User Manual SNMP The SNMP Setting allows you to quickly enable or disable the SNMP function. The default SNMP Setting is Disabled. Click Enabled and then click Apply to make it effective. Figure 4.3 – SNMP in Smart Wizard NOTE: Changing the system IP address will disconnect you from the current connection.

  • Page 24: Web-Based Management

    Logout button first, then it will be seen as an abnormal exit and the login session will still be occupied. Finally, by clicking on the D-Link logo at the upper-left corner of the screen you will be redirected to the local D-Link website.

  • Page 25: Tool Bar > Save Menu

    Configuration D-Link Web Smart Switch User Manual Tool Bar > Save Menu The Save Menu provides Save Configuration and Save Log functions. Figure 4.6 – Save Menu Save Configuration Select to save the entire configuration changes you have made to the device to switch’s non-volatile RAM.

  • Page 26: Reboot Device

    Configuration D-Link Web Smart Switch User Manual Reboot Device Provide a safe way to reboot the system. Click Apply to restart the Switch. Figure 4.12 – Tools Menu > Reboot Device Configuration Backup and Restore Allow the current configuration settings to be saved to a file (not including the password), and if necessary, you can restore the configuration settings from this file.

  • Page 27: Language Management

    Configuration D-Link Web Smart Switch User Manual Figure 4.14 – Tools Menu > Firmware Backup and Upgrade HTTP: Backup or upgrade the firmware to or from your local PC drive. Click Backup to save the firmware to your disk. Click Browse to browse your inventories for a saved firmware file.

  • Page 28: Tool Bar > Smart Wizard

    Tool Bar > Online Help The Online Help provides two ways of online support: D-Link Support Site will lead you to the D-Link website where you can find online resources such as updated firmware images; User Guide can offer an immediate reference for the feature definition or configuration guide.

  • Page 29: Function Tree

    Configuration D-Link Web Smart Switch User Manual Function Tree All configuration options on the Switch are accessed through the Function Tree. Click the setup item that you want to configure. The following sections provide more detailed description of each feature and function.

  • Page 30: System > System Settings

    Configuration D-Link Web Smart Switch User Manual Figure 4.18 – Device Information It also offers an overall status of common software features: RSTP: Click Settings to link to L2 Functions > Spanning Tree > STP Global Settings. Default is disabled.

  • Page 31: System > Password

    Configuration D-Link Web Smart Switch User Manual IP Information: There are three ways for the Switch to obtain an IP address: Static, DHCP (Dynamic Host Configuration Protocol) and BOOTP. When using the static mode, the IP Address, Subnet Mask and Gateway can be manually configured.

  • Page 32: System > Dhcp Auto Configuration

    Configuration D-Link Web Smart Switch User Manual Speed: Gigabit Fiber connections can operate in 1000M Full, Auto or Disabled. Copper connections can operate in Forced Mode settings (1000M Full, 100M Full, 100M Half, 10M Full, 10M Half), Auto, or Disabled. 100M Fiber connections support 100M Full, or Disabled. The default setting for all ports is Auto.

  • Page 33: System > Time Profile

    Configuration D-Link Web Smart Switch User Manual Server IP Address: Specifies the IPv4 address of the system log server. UDP Port: Specifies the UDP port to which the server logs are sent. The possible range is from 1 to 65535.

  • Page 34: System > Ieee802.3Az Eee Settings

    Configuration D-Link Web Smart Switch User Manual Figure 4.25 – System > Power Saving Advanced Power Saving Settings: Type: Specifies the Power Saving type to be LED Shut-off, Port Shut-off, Port Standby or System Hibernation. LED Shut-off - The LED Shut-off gets high priority. If the user select LED Shut-off, the profile function will not take effect.

  • Page 35: System > Dns Resolver Settings

    Configuration D-Link Web Smart Switch User Manual Figure 4.26 – System > IEEE802.3az EEE Settings From Port / To Port: A consecutive group of ports may be configured starting with the selected port. State: Enabled or Disabled the IEEE802.3az EEE for the specified ports. By default, all ports are enabled.

  • Page 36: Vlan > 802.1Q Vlan

    Configuration D-Link Web Smart Switch User Manual VLAN > 802.1Q VLAN A VLAN is a group of ports that can be anywhere in the network, but communicate as though they were in the same area. VLANs can be easily organized to reflect department groups (such as R&D, Marketing), usage groups (such...

  • Page 37: Vlan > 802.1Q Management Vlan

    Configuration D-Link Web Smart Switch User Manual Figure 4.30 – Configuration > 802.1Q VLAN PVID VLAN > 802.1Q Management VLAN The 802.1Q Management VLAN setting allows user to transfer the authority of the switch from the default VLAN to others created by users. This allows managing the whole network more flexible.

  • Page 38: Vlan > Voice Vlan > Voice Vlan Port Settings

    Configuration D-Link Web Smart Switch User Manual Voice VLAN OUI Settings: This allows the user to configure the user-defined voice traffic’s OUI. An Organizationally Unique Identifier (OUI) is the first three bytes of the MAC address. This identifier uniquely identifies a vendor, manufacturer, or other organization.

  • Page 39: Vlan > Voice Vlan > Voice Device List

    Configuration D-Link Web Smart Switch User Manual Figure 4.33 – VLAN > Voice VLAN > Voice VLAN Port Settings From Port / To Port: A consecutive group of ports may be configured starting with the selected port. Auto Detection: Switch will add ports to the voice VLAN automatically if it detects the device OUI matches the Telephony OUI configured in Voice VLAN OUI Setting page.

  • Page 40: Vlan > Auto Surveillance Vlan

    Similar as Voice VLAN, Auto Surveillance VLAN is a feature that allows you to automatically place the video traffic from D-Link IP cameras to an assigned VLAN to enhance the IP surveillance service. With a higher priority and individual VLAN, the quality and the security of surveillance traffic are guaranteed. The Auto Surveillance VLAN function will check the source MAC address on the incoming packets.

  • Page 41: L2 Functions > Jumbo Frame

    L2 Functions > Jumbo Frame D-Link Gigabit Web Smart Switches support jumbo frames (frames larger than the Ethernet frame size of 1536 bytes) of up to 13,004 bytes (tagged). Default is Disabled. Click Enabled, and then Apply to turn on the jumbo frame support.

  • Page 42: L2 Functions > Mac Address Table > Static Mac

    Configuration D-Link Web Smart Switch User Manual Figure 4.38 – L2 Functions > Loopback Detection Loopback Detection: Click to enable or disable loopback detection. The default is Disabled. Mode: Specifies Port-based or VLAN-based mode. If the port-based mode is selected, the loop happening port will be shut down and affect all member VLANs.

  • Page 43: L2 Functions > Mac Address Table > Dynamic Forwarding Table

    Configuration D-Link Web Smart Switch User Manual Figure 4.39 – L2 Functions > MAC Address Table > Static Mac Address To initiate the removal of auto-learning for any of the uplink ports, click Enabled to enable this feature, and then select the port(s) for auto learning to be enabled.

  • Page 44: L2 Functions > Spanning Tree > Stp Global Settings

    Configuration D-Link Web Smart Switch User Manual Figure 4.40 – L2 Functions > MAC Address Table > Dynamic Forwarding Table L2 Functions > Spanning Tree > STP Global Settings The Switch implements two versions of the Spanning Tree Protocol, the Rapid Spanning Tree Protocol (RSTP) as defined by the IEEE 802.1D-2004 specification and a version compatible with the IEEE 802.1D-...

  • Page 45: L2 Functions > Spanning Tree > Stp Port Settings

    Configuration D-Link Web Smart Switch User Manual Figure 4.41 – L2 Functions > Spanning Tree > STP Global Settings STP Version: You can choose RSTP or STP Compatible. The default setting is RSTP. Bridge Priority: This value, between 0 and 61440, specifies the priority for forwarding packets. The lower the value, the higher the priority.
  • Page 46 Configuration D-Link Web Smart Switch User Manual Figure 4.42 – L2 Functions > Spanning Tree > STP Port Settings From Port/To Port: A consecutive group of ports may be configured starting with the selected port. State: Use the drop-down menu to enable or disable STP by per-port based. It will be selectable after the global STP is enabled.

  • Page 47: L2 Functions > Link Aggregation > Port Trunking

    Configuration D-Link Web Smart Switch User Manual Restricted Role: Toggle between True and False to set the restricted role state of the packet. If set to True, the port will never be selected to be the Root port. The default value is False.

  • Page 48: L2 Functions > Multicast > Igmp Snooping

    Configuration D-Link Web Smart Switch User Manual Figure 4.44 – L2 Functions > Link Aggregation > LACP Port Settings From Port / To Port: A consecutive group of ports may be configured starting with the selected port. Activity: There are two different roles of LACP ports: Active - Active LACP ports are capable of processing and sending LACP control frames.
  • Page 49 Configuration D-Link Web Smart Switch User Manual Figure 4.45 – L2 Functions > Multicast > IGMP Snooping By default, IGMP is Disabled. If enabled, the IGMP Global Settings will need to be entered: Host Timeout (130-153025): This is the interval after which a learned host port entry will be purged. For each host port learned, a 'Port Purge Timer' runs for 'Host Port Purge Interval'.

  • Page 50: L2 Functions > Multicast > Mld Snooping

    Figure 4.46 – L2 Functions > Multicast > IGMP Snooping VLAN Settings State: Specify the State to be enabled or disabled. Querier State: D-Link Smart Switch is able to send out the IGMP Queries to check the status of multicast clients. The default state is Disabled.
  • Page 51 Configuration D-Link Web Smart Switch User Manual Figure 4.48 – L2 Functions > Multicast > MLD Snooping By default, MLD is Disabled. If enabled, the MLD Global Settings will need to be entered: Host Timeout (130-153025): This is the interval after which a learned host port entry will be purged. For each host port learned, a 'Port Purge Timer' runs for 'Host Port Purge Interval'.

  • Page 52: L2 Functions > Multicast > Multicast Forwarding

    Figure 4.49 – L2 Functions > Multicast > MLD Snooping VLAN Settings State: Specify the State to be enabled or disabled. Querier State: D-Link Smart Switch is able to send out the MLD Queries to check the status of multicast clients. The default state is Disabled.

  • Page 53: L2 Functions > Multicast > Multicast Filtering Mode

    Configuration D-Link Web Smart Switch User Manual Multicast MAC Address: The MAC address of the static source of multicast packets. This must be a multicast MAC address. Port: Allows the selection of ports that will be members of the static multicast group.

  • Page 54: L2 Functions > Sntp > Time Zone Settings

    Configuration D-Link Web Smart Switch User Manual Current Time: Displays the current date and time for the switch. If choosing SNTP for the clock source, then the following parameters will be available: SNTP First Server: Specifies the IP address of the primary SNTP server from which the system time is retrieved.

  • Page 55: L2 Functions > Lldp > Lldp Global Settings

    Configuration D-Link Web Smart Switch User Manual L2 Functions > LLDP > LLDP Global Settings LLDP (Link Layer Discovery Protocol) provides IEEE 802.1AB standards-based method for switches to advertise themselves to neighbor devices, as well as to learn about neighbor LLDP devices. SNMP utilities can learn the network topology by obtaining the MIB information in each LLDP device.

  • Page 56: L2 Functions > Lldp > 802.1 Extension Tlv

    Configuration D-Link Web Smart Switch User Manual Figure 4.56 – L2 Functions > LLDP > LLDP Port Settings From Port/ To Port: A consecutive group of ports may be configured starting with the selected port. Notification State: Specifies whether notification is sent when an LLDP topology change occurs on the port.

  • Page 57: L2 Functions > Lldp > 802.3 Extension Tlv

    Configuration D-Link Web Smart Switch User Manual Figure 4.57 – L2 Functions > LLDP > 802.1 Extension TLV Port Settings From Port / To Port: A consecutive group of ports may be configured starting with the selected port. Port VLAN ID: Specifies the port VLAN ID TLV to be enabled or disabled.

  • Page 58: L2 Functions > Lldp > Lldp Management Address Settings

    Configuration D-Link Web Smart Switch User Manual Figure 4.58 – L2 Functions > LLDP > 802.3 Extension TLV Port Settings From Port / To Port: A consecutive group of ports may be configured starting with the selected port. MAC/PHY Configuration/Status: Specifies that the LLDP agent should transmit the MAC/PHY configuration/status TLV.

  • Page 59: L2 Functions > Lldp > Lldp Management Address Table

    Configuration D-Link Web Smart Switch User Manual Figure 4.59 – L2 Functions > LLDP > LLDP Management Address Settings From Port / To Port: A consecutive group of ports may be configured starting with the selected port. Address: Enter the management IPv4 address.

  • Page 60: L2 Functions > Lldp > Lldp Local Port Table

    Configuration D-Link Web Smart Switch User Manual L2 Functions > LLDP > LLDP Local Port Table The LLDP Local Port Table window displays LLDP local port information. Figure 4.61 – L2 Functions > LLDP > LLDP Local Port Brief Table Port: Displays the port number.

  • Page 61: L2 Functions > Lldp > Lldp Remote Port Table

    Configuration D-Link Web Smart Switch User Manual Figure 4.63 – L2 Functions > LLDP > LLDP Local Port Detailed Table L2 Functions > LLDP > LLDP Remote Port Table This LLDP Remote Port Table page is used to display the LLDP Remote Port Brief Table. Select port...
  • Page 62 Configuration D-Link Web Smart Switch User Manual Figure 4.64 – L2 Functions > LLDP > LLDP Remote Port Brief Table To view the more information for a remote port, click the View Normal hyperlink and the following window displays.
  • Page 63 Configuration D-Link Web Smart Switch User Manual Figure 4.65 – L2 Functions > LLDP > LLDP Remote Port Normal Table To view the detailed information for a remote port, click View Detailed and the following page displays.

  • Page 64: L2 Functions > Lldp > Lldp Statistics

    Configuration D-Link Web Smart Switch User Manual Figure 4.66 – L2 Functions > LLDP > LLDP Remote Port Detailed Table L2 Functions > LLDP > LLDP Statistics The LLDP Statistics window displays an overview of all LLDP traffic.
  • Page 65 Configuration D-Link Web Smart Switch User Manual Figure 4.67 – L2 Functions > LLDP > LLDP Statistics The following information can be viewed: LLDP Statistics System: Displays the counters that refer to the whole switch. Last Change Time – Displays the time for when the last change entry was last deleted or added. It is also displays the time elapsed since last change was detected.

  • Page 66: L3 Functions > Dhcp > Dhcp Relay Settings

    Configuration D-Link Web Smart Switch User Manual L3 Functions > DHCP > DHCP Relay Settings This window contains two main parts, DHCP Relay Global Settings and DHCP Relay Interface Settings. In DHCP Relay Global Settings, users can enable and configure DHCP Relay Global Settings. The relay hops count limit allows the maximum number of hops (routers) that the DHCP messages can be relayed through to be set.

  • Page 67: Qos > 802.1P/Dscp/Tos

    Configuration D-Link Web Smart Switch User Manual Figure 4.69 – QoS > Bandwidth Control From Port / To Port: A consecutive group of ports may be configured starting with the selected port. Type: This drop-down menu allows you to select between RX (receive), TX (transmit), and Both. This setting will determine whether the bandwidth ceiling is applied to receiving, transmitting, or both receiving and transmitting packets.
  • Page 68 Configuration D-Link Web Smart Switch User Manual Figure 4.70 – QoS > 802.1p/DSCP/ToS Select QoS Mode: Specifies the QoS mode to be 802.1p, DSCP or ToS. Queuing Mechanism: Strict Priority - Denoting a Strict scheduling will set the highest queue to be emptied first while the...

  • Page 69: Qos > Tcp/Udp Port Priority Settings

    Configuration D-Link Web Smart Switch User Manual QoS > TCP/UDP Port Priority Settings The TCP/UDP Port Priority Settings window allows user to configure the port priority. Figure 4.71 – QoS > TCP/UDP Port Priority Settings TCP/UDP: Specify port priority of TCP or UDP to be configured.

  • Page 70: Security > Dos Attack Prevention

    Configuration D-Link Web Smart Switch User Manual Figure 4.73 – Security > Port Security From Port / To Port: A consecutive group of ports may be configured starting with the selected port. Admin State: Use the drop-down menu to enable or disable Port Security (locked MAC address table for the selected ports).

  • Page 71: Security > Traffic Segmentation

    Configuration D-Link Web Smart Switch User Manual DoS Type Selection: Land Attack - Specifies that the DoS attack prevention type will be set to prevent LAND attacks. Blat Attack -- Specifies that the DoS attack prevention type will be set to prevent BLAT attacks.

  • Page 72: Security > Safeguard Engine

    Click Select All button to check all ports. Click Clear to uncheck all ports. Security > Safeguard Engine D-Link’s Safeguard Engine is a robust and innovative technology that automatically throttles the impact of packet flooding into the switch's CPU. This function helps protect the Web-Smart Switch from being interrupted by malicious viruses or worm attacks.

  • Page 73: Security > Dhcp Server Screening

    Configuration D-Link Web Smart Switch User Manual The ARP Spoofing Prevention function can discard the ARP Spoofing Attack in the network by checking the gratuitous ARP packets and filtering those with illegal IP or MAC addresses. Figure 4.78 – Security > ARP Spoofing Prevention Enter the IP Address, MAC Address, Ports and then click Add to create a checking/filtering rule.

  • Page 74: Security > Ssl

    Configuration D-Link Web Smart Switch User Manual Security > SSL Secure Sockets Layer (SSL) is a security feature that provides a secure communication path between a Web Management host and the Switch Web UI by using authentication, digital signatures and encryption. These security functions are implemented by Ciphersuite, a security string that determines the cryptographic parameters, encryption algorithms and key sizes.
  • Page 75 Configuration D-Link Web Smart Switch User Manual Figure 4.81 – AAA > 802.1X > 802.1X Settings 802.1X: By default, 802.1X is disabled. To use EAP for security, click Enabled and set the 802.1X Global Settings. To establish 802.1X port-specific assignments, click Enabled and configure 802.1X Port Access Control.

  • Page 76: Aaa > 802.1X > Guest Vlan Settings

    Configuration D-Link Web Smart Switch User Manual Auto - If Auto is selected, it will enable 802.1X and cause the port to begin in the unauthorized state, allowing only EAPOL frames to be sent and received through the port. The authentication process begins when the link state of the port transitions from down to up, or when an EAPOL-start frame is received.

  • Page 77: Acl > Acl Wizard

    Configuration D-Link Web Smart Switch User Manual Click Apply to implement the changes made. ACL > ACL Wizard Access Control List (ACL) allows you to establish criterion to determine whether or not the Switch will forward packets based on the information contained in each packet's header. This criterion can be specified on a basis of the MAC address, or IP address.

  • Page 78: Acl > Access Profile List

    Configuration D-Link Web Smart Switch User Manual NOTE: Once the ACL rules conflict, rules with the smaller rule ID will take higher priority. NOTE: careful configuration. Inappropriate design may lead to management access failure. ACL > Access Profile List The ACL Profile List provides information for configuring ACL Profiles manually. ACL profiles are attached to interfaces, and define how packets are forwarded if they match the ACL criteria.
  • Page 79 Configuration D-Link Web Smart Switch User Manual Figure 4.86 – Add Access Profile The steps of adding an access profile are described below: 1) After selecting the Select Profile ID and Select Frame Type (MAC ACL or IPv4 ACL), specify attributes like Untagged/Tagged (for MAC), or ICMP/IGMP/TCP/UDP/Protocol ID (for IPv4).
  • Page 80 Configuration D-Link Web Smart Switch User Manual TCP: Specifies TCP as the Layer 3 protocol that the access profile checks. UDP: Specifies UDP as the Layer 3 protocol that the access profile checks. Protocol ID: Specifies Protocol ID as the Layer 3 protocol that the access profile checks.
  • Page 81 Configuration D-Link Web Smart Switch User Manual Figure 4.89 – ACL > Access Profile List > Add ACL Profile (IPv4 ACL ICMP) The Add ACL Profile IPv4 ACL ICMP address window contains the following fields: IPv4 TOS: Select this option to include IPv4 type of service parameters in this profile.
  • Page 82 Configuration D-Link Web Smart Switch User Manual To define the IPv4 ACL IGMP profile, Select IPv4 ACL with IGMP and click Select button. The following window displays: Figure 4.90 – ACL > Access Profile List > Add ACL Profile (IPv4 ACL IGMP) The Add ACL Profile IPv4 ACL IGMP address window contains the following fields: IPv4 TOS: Select this option to include IPv4 type of service parameters in this profile.
  • Page 83 Configuration D-Link Web Smart Switch User Manual To define the IPv4 ACL TCP profile, Select IPv4 ACL with TCP and click Select button. The following window displays: Figure 4.91 – ACL > Access Profile List > Add ACL Profile (IPv4 ACL TCP) The Add ACL Profile IPv4 ACL TCP port window contains the following fields: IPv4 TOS: Select this option to include IPv4 type of service parameters in this profile.
  • Page 84 Configuration D-Link Web Smart Switch User Manual To define the IPv4 ACL UDP profile, Select IPv4 ACL with UDP and click Select button. The following window displays: Figure 5.92 – ACL > Access Profile List > Add ACL Profile (IPv4 ACL UDP) The Add ACL Profile IPv4 ACL UDP port window contains the following fields: IPv4 TOS: Select this option to include IPv4 type of service parameters in this profile.
  • Page 85 Configuration D-Link Web Smart Switch User Manual To define the IPv4 ACL Protocol ID profile, Select IPv4 ACL with Protocol ID and click Select button. The following window displays: Figure 4.92 – ACL > Access Profile List > Add ACL Profile (IPv4 ACL Protocol ID) The Add ACL Profile IPv4 Protocol ID contains the following fields: IPv4 TOS: Select this option to include IPv4 type of service parameters in this profile.
  • Page 86 Configuration D-Link Web Smart Switch User Manual Figure 4.93 – Confirmation of Creating Access Profile List NOTE: You cannot select Payload in a MAC ACL, or L2 Header in IP ACL. 3) After the Profile ID has been created, click Continue to go back to the main Access Profile List window.

  • Page 87: Acl > Acl Finder

    Configuration D-Link Web Smart Switch User Manual Rule Detail: Specifies the detail of the rule. Access ID – Specifies the Access ID (1-65535). Type – Displays the type of rule. MAC, or IP. VLAN ID – Specifies the VLAN ID.

  • Page 88: Snmp > Snmp > Snmp Global Settings

    Configuration D-Link Web Smart Switch User Manual Figure 5.100 – ACL > ACL Finder SNMP > SNMP > SNMP Global Settings Simple Network Management Protocol (SNMP) is an OSI Layer 7 (Application Layer) protocol designed specifically for managing and monitoring network devices. SNMP enables network management stations to read and modify the settings of gateways, routers, switches, and other network devices.

  • Page 89: Snmp > Snmp > Snmp Group

    Configuration D-Link Web Smart Switch User Manual Figure 4.97 – SNMP > SNMP > SNMP User Table User Name: Enter a SNMP user name of up to 32 characters. Group Name: Specify the SNMP group of the SNMP user. SNMP Version: Specify the SNMP version of the user. Only SNMPv3 encrypts the messages.

  • Page 90: Snmp > Snmp > Snmp View

    Configuration D-Link Web Smart Switch User Manual v2c – SNMPv2c supports both centralized and distributed network management strategies. It includes improvements in the Structure of Management Information (SMI) and adds some security features. v3 – SNMPv3 provides secure access to devices through a combination of authentication and encrypting packets over the network.

  • Page 91: Snmp > Snmp > Snmp Host

    Configuration D-Link Web Smart Switch User Manual Community Name: Type an alphanumeric string of up to 32 characters that is used to identify members of an SNMP community. This string is used like a password to give remote SNMP managers access to MIB objects in the Switch’s SNMP agent.

  • Page 92: Snmp > Rmon > Rmon History

    Configuration D-Link Web Smart Switch User Manual Figure 4.104 – SNMP > RMON > RMON Ethernet Statistics Configuration The RMON Ethernet Statistics Configuration contains the following fields: Index (1 ~ 65535): Indicates the RMON Ethernet Statistics entry number. Port: Specifies the port from which the RMON information was taken.

  • Page 93: Snmp > Rmon > Rmon Event

    Configuration D-Link Web Smart Switch User Manual Figure 4.106 – SNMP > RMON > RMON Alarm Settings The configuration contains the following fields: Index (1 ~ 65535): Indicates the RMON alarm entry number. Variable: Specify the selected MIB variable value.

  • Page 94: Monitoring > Port Statistics

    Configuration D-Link Web Smart Switch User Manual Log and Trap – Indicates that the event is both a log entry and a trap. Community: When SNMP Trap or Log and Trap is selected in Type, enter the community name that has been configured in SNMP Host.

  • Page 95: Monitoring > Cable Diagnostics

    Configuration D-Link Web Smart Switch User Manual To view the statistics of individual ports, click one of the linked port numbers for details. Figure 4.109 – Monitoring > Port Statistics Click Back to go back to the previous page. Click Refresh to renew the information. Click Clear to reset the details.

  • Page 96: Monitoring > System Log

    Configuration D-Link Web Smart Switch User Manual • Open in Cable means the wires of RJ45 cable may be broken, or the other end of the cable is simply disconnected. • Test Failed means some other errors occurred during cable diagnostics. Please select the same port and test again.

  • Page 97: Command Line Interface

    D-Link Web Smart Switch User Manual Command Line Interface The D-Link Web Smart Switch allows a computer or terminal to perform some basic monitoring and configuration tasks by using the Command Line Interface (CLI) via the TELNET or SSH protocol.

  • Page 98: Download

    Command Line Interface D-Link Web Smart Switch User Manual Command Parameter reboot reset config show ipif show switch config account admin password save debug info Each command is listed in detail, as follows: Purpose This command is used to display a list of commands.

  • Page 99: Upload

    Command Line Interface D-Link Web Smart Switch User Manual download { firmware_fromT F T P | c fg_fromT F T P } Syntax The download command downloads a firmware file, boot file, or Description switch configuration file from a TFTP server.

  • Page 100: Config Ipif System

    Command Line Interface D-Link Web Smart Switch User Manual DGS-1210-24:admin#upload firmware_toTFTP 10.90.90.10 RUNTIME Connecting to server....Done. Upload firmware......Done. DGS-1210-24:admin# config ipif System Purpose This command is used to configure the System IP interface. Syntax config ipif System {ipaddress ...

  • Page 101: Ping

    Command Line Interface D-Link Web Smart Switch User Manual DGS-1210-24:admin#logout ********** * Logout * ********** NOTE: Save your configuration changes before logging out. ping Purpose This command is used to test the connectivity between the Switch and other network devices.

  • Page 102: Reset Config

    Command Line Interface D-Link Web Smart Switch User Manual Restrictions None. Example usage: To reboot the Switch: DGS-1210-24:admin#reboot Are you sure you want to proceed with the system reboot?(y/n) y % Device will reboot, please wait a few minutes to re-login.

  • Page 103: Show Switch

    Command Line Interface D-Link Web Smart Switch User Manual DGS-1210-24:admin#show ipif IP Setting Mode : Static IP Address : 10.90.90.90 Subnet Mask : 255.0.0.0 Default Gateway : ---.---.---.--- DGS-1210-24:admin# show switch Purpose This command is used to display information about the Switch.

  • Page 104: Save

    Command Line Interface D-Link Web Smart Switch User Manual DGS-1210-24:admin#config account admin password 1234 DGS-1210-24:admin# save Purpose This command is used to save changes made in the Switch’s configuration to the non-volatile RAM. s ave Syntax The s ave command saves the configuration changes to the Description memory.
  • Page 105 Command Line Interface D-Link Web Smart Switch User Manual DGS-1210-24:admin#debug info % segmentation fault log file : File doesn't exist !!! % ARP table : Address Hardware Address Type Interface Mapping ------- ---------------- ---- --------- ------- 10.0.0.0 FF-FF-FF-FF-FF-FF ARPA System Local/Broadcast 10.90.90.10...

  • Page 106: Appendix A - Ethernet Technology

    Appendix A - Ethernet Technology D-Link Web Smart Switch User Manual Appendix A - Ethernet Technology This chapter will describe the features of the D-Link Web Smart Switch and provide some background information about Ethernet/Fast Ethernet/Gigabit Ethernet switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and...

  • Page 107: Appendix B - Technical Specifications

    Appendix B - Technical Specifications D-Link Web Smart Switch User Manual Appendix B - Technical Specifications Acoustic Value: Hardware Specifications - DGS-1210-16/24: 0dB (Fanless) Key Components / Performance - DGS-1210-48: max. 46.7dB (One Smart Switching Capacity: Fan) - DGS-1210-16: 40Gbps Operation Temperature: -5~50°C...

  • Page 108: Security

    Appendix B - Technical Specifications D-Link Web Smart Switch User Manual DSCP Management TCP/UDP port number Web-based Graphical User Interface Up to 8 queues per port Limited Command Line Interface (via Supports Strict / WRR mode in queue Telnet) handling...

This manual is also suitable for:

Web smart switch dgs-1210-24Web smart switch dgs-1210-28

Table of Contents