D-Link DGS-1210-28P Manual
Hide thumbs
Also See for DGS-1210-28P:
- Getting started manual (49 pages) ,
- Manual (9 pages) ,
- Reference manual (109 pages)
Table of Contents
These release notes include important information about D-Link switch firmware revisions. Please
verify that these release notes are correct for your switch:
-
If you are installing a new switch, please check the hardware version on the device label;
make sure that your switch meets the system requirement of this firmware version. Please
refer to
Revision History and System Requirement
matrix.
-
If the switch is powered on, you can check the hardware version by typing "show switch"
command via Telnet or by checking the device information page on the web graphic user
interface.
-
If you plan to upgrade to the new firmware release, please refer to the
for the correct firmware upgrade procedure.
For more detailed information regarding our switch products, please refer to
Documentation.
You can also download the switch firmware, D-View modules and technical documentation from
http://tsd.dlink.com.tw.
Content:
Upgrade Instructions: ............................................................................................................ 2
Upgrade using CLI (via Telnet) ................................................................................... 2
Upgrade using Web-UI .............................................................................................. 3
Upgrade using SmartConsole Utility............................................................................ 5
2. Execute SmartConsole Utility ................................................................................. 5
New Features: .................................................................................................................... 8
Changes of MIB & D-View Module: ............................................................................................. 8
Changes of Command Line Interface: ........................................................................................ 10
Problem Fixed: ................................................................................................................. 11
Known Issues: .................................................................................................................. 13
Related Documentation: ...................................................................................................... 15
DGS-1210-28P Firmware Release Notes
1
Firmware Version: 4.00.B055
Boot Code Version: 1.00.012
MIB Version: 4.00.B014
D-View Module Version: 4.0.0.3
Published: Sep. 04, 2014
for detailed firmware and hardware
Upgrade Instructions
Related
Table of Contents
Related Manuals for D-Link DGS-1210-28P
Summary of Contents for D-Link DGS-1210-28P
-
Page 1: Table Of Contents
D-View Module Version: 4.0.0.3 Published: Sep. 04, 2014 These release notes include important information about D-Link switch firmware revisions. Please verify that these release notes are correct for your switch: If you are installing a new switch, please check the hardware version on the device label;... -
Page 2: Upgrade Instructions
Boot: 1.00.010 Upgrade Instructions: D-Link Smart Switches support firmware upgrade via TFTP server. You can download the firmware from D-Link web site http://tsd.dlink.com.tw, and copy the downloaded firmware to the TFTP server folder. Please make sure that the TFTP server is accessible from the switch via networks. -
Page 3: Upgrade Using Web-Ui
DGS-1210-28P Firmware Release Notes upon the initial connection, both the default user name and password are admin. To upgrade the switch firmware, execute the following command: Command Function Download firmware file from the TFTP download{firmware_fromTFTP server to the switch. tftp://ip-address/filename | cfg_fromTFTP tftp://ip-address/filename} When completing firmware upgrade, the following messages will pop up. - Page 4 DGS-1210-28P Firmware Release Notes device. Open the web browser from the workstation and enter the IP address of the switch. The switch’s default IP address is 10.90.90.90. Enter administrator’s password when prompted. The password is admin by default. To update switch's firmware or configuration file, select Tools > Firmware Backup &...
-
Page 5: Upgrade Using Smartconsole Utility
DGS-1210-28P Firmware Release Notes Select TFTP to upgrade the firmware to or from a remote TFTP server. a. Enter the name of the firmware file located on the TFTP server b. Click Upgrade after selecting the firmware file you want to restore c. - Page 6 DGS-1210-28P Firmware Release Notes 3. Click Refresh button to search target switch 4. Single click the icon of the column to choose the target switch 5. Click Firmware Upgrade button...
- Page 7 DGS-1210-28P Firmware Release Notes 6. Select PC IP address is used to connect the target switch, then click Browse button and select the firmware file (Model name_HW ver._FW ver. .hex) on your local hard drive. 7. Click the checkbox and click “Submit” button to start firmware upgrade.
-
Page 8: New Features
DGS-1210-28P Firmware Release Notes New Features: Firmware New Features Version V4.00.B055 V4.00.B053 V4.00.B052 V4.00.B049 V4.00.B046 V4.00.B045 V4.00.043 V4.00.B042 V4.00.B039 First Release V4.00.024 Changes of MIB & D-View Module: The new features of MIB file are also included in the corresponding D-View module. Please download the D-View module from http://tsd.dlink.com.tw. - Page 9 DGS-1210-28P Firmware Release Notes Firmware MIB File New Features Version DGS-1210-28P-CX-4-00-B014.mib V4.00.B055 DGS-1210-28P-CX-4-00-B014.mib V4.00.B053 DGS-1210-28P-CX-4-00-B014.mib V4.00.B052 DGS-1210-28P-CX-4-00-B014.mib 1. Add poePortLegacyPDDetect object on V4.00.B049 DGS-1210-28P. DGS-1210-28P-CX-4-00-013.mib V4.00.B046 DGS-1210-28P-CX-4-00-013.mib V4.00.B045 DGS-1210-28P-CX-4-00-013.mib V4.00.043 Add poePortDelayPowerDetect object for 59111 IOT issue with HIKVision Camera DGS-1210-28P-CX-4-00-B012.mib...
-
Page 10: Changes Of Command Line Interface
DGS-1210-28P Firmware Release Notes DV_DGS-1210-28P_V4.0.0.3_FW_v4.00.024.exe V4.00.B053 DV_DGS-1210-28P_V4.0.0.3_FW_v4.00.024.exe V4.00.B052 DV_DGS-1210-28P_V4.0.0.3_FW_v4.00.024.exe V4.00.B049 DV_DGS-1210-28P_V4.0.0.3_FW_v4.00.024.exe V4.00.B046 DV_DGS-1210-28P_V4.0.0.3_FW_v4.00.024.exe V4.00.B045 DV_DGS-1210-28P_V4.0.0.3_FW_v4.00.024.exe V4.00.043 DV_DGS-1210-28P_V4.0.0.3_FW_v4.00.024.exe V4.00.B042 DV_DGS-1210-28P_V4.0.0.3_FW_v4.00.024.exe V4.00.B039 DV_DGS-1210-28P_V4.0.0.3_FW_v4.00.024.exe First Release V4.00.024 Changes of Command Line Interface: The section below only shows command line changes that may bring backward compatibility issues with configuration settings for previous version of firmware. -
Page 11: Problem Fixed
DGS-1210-28P Firmware Release Notes V4.00.B046 V4.00.B045 V4.00.043 V4.00.B042 V4.00.B039 V4.00.024 First Release Problem Fixed: Firmware Problems Fixed Version V4.00.B055 1. Fix incorrect model on SSL certificate. V4.00.B053 1. [DGC20140801000004-Taiwan] DGS-1210-28 can't show the specific igmp group. 1. Security Vulnerabilities Addressed: OpenSSL 0.9.8x does not properly... - Page 12 DGS-1210-28P Firmware Release Notes * D-Link tracking number is enclosed in ()
-
Page 13: Known Issues
Wait about 10 mins, the DUT will no reply. Broadcom 1000M Full does not support MDI/MDIX. 2. Follow D-Link test plan, the DUT default settings ping respond need to <= 1 ms, but our DUT cannot fit this request. (Limitation) V4.00.024... - Page 14 MAC. (via ASV default OUI MAC address) After confirm with D-Link Shan, he agree this behavior when forward fit OUI packets to disable auto learning interface at currect state, but still need note to D-Lab Bug System and test report.
-
Page 15: Related Documentation
18. The DUT Static MAC auto learning disable interface still can forward packets to other interface even does not create static MAC. (via ASV default OUI MAC address)(know issue) Related Documentation: DGS-1210-28P Series User Manual DGS-1210-28P Series Getting Started Guide...