Table of Contents
Disable BOOTP/DHCP with RSLinx Classic Software
To disable BOOTP/DHCP from RSLinx Classic software, complete the
following steps.
1. Start RSLinx Classic software.
After several seconds, an RSWho dialog box appears.
2. If no RSWho dialog box appears, from the Communications pull-down
menu, choose RSWho.
3. Navigate to the controller.
You can access the controller via the USB or an EtherNet/IP driver.
4. Right-click on the controller and choose Module Configuration.
Rockwell Automation Publication 5069-UM002A-EN-P - January 2019
Connect to the Controller
Chapter 2
59
Table of Contents
