Related Manuals for Siemens SIPASS STANDALONE ACS3110
Summary of Contents for Siemens SIPASS STANDALONE ACS3110
- Page 1 SiPass standalone ACS3110 User manual Fire Safety & Security Products Siemens Building Technologies...
- Page 2 Data and design subject to change without notice. / Supply subject to availability. © 2005 Copyright by Siemens Building Technologies AG Wir behalten uns alle Rechte an diesem Dokument und an dem in ihm dargestellten Gegenstand vor. Der Empfänger anerkennt diese Rechte und wird dieses Dokument nicht ohne unsere vorgängige schriftliche Ermächtigung ganz oder teilweise Dritten zugänglich machen...
-
Page 3: Table Of Contents
17.1 Siemens Building Technologies Fire Safety & Security Products Basic information...5 Access modes ...5 Tag types ...5 Badge type...6 User badge...6 Master badge ...6 LED indicators...7 Overall time-out...7 Security measures ...8 Missing tag ...8 Anti tamper...8 Anti vandal ...8 Wake up: Declaring the Program Master...9 Declaring the masters ...10... -
Page 5: Basic Information
Void Master Program Master Add Master Night lock master User Siemens Building Technologies Fire Safety & Security Products Normal access, no door contact monitoring Access for ”Special user” badges only. No access for normal user badges. Void... -
Page 6: Badge Type
Allows to introduce new badges to the systems memory Void Master Allows to delete (void) badges from the systems memory Night lock master Switches the system from access mode to night lock mode and back. Siemens Building Technologies Fire Safety & Security Products 02.2005... -
Page 7: Led Indicators
LED indicators Fig. 1 Overall time-out In Program Mode, after 30 seconds of inactivity, an error tone sounds, and normal operation resumes. Siemens Building Technologies Fire Safety & Security Products Read indication (yellow) Open (green) Closed (red) Night lock (red) -
Page 8: Security Measures
A tamper alarm is triggered if the unit is ripped off the wall. Anti vandal Thanks to the proximity reading principle, the reader can be installed behind pro- tective surfaces, such as glass, plastic or marble, but not metal. Siemens Building Technologies Fire Safety & Security Products 02.2005... -
Page 9: Wake Up: Declaring The Program Master
Any SiPass 125 kHz Proximity badge can be used as the Program Master. Program the corresponding master cards according to their symbols. For security reasons, carefully guard masters, note their numbers and store them in a secure place. Siemens Building Technologies Fire Safety & Security Products New Program Master... -
Page 10: Declaring The Masters
Be declared Void– / Add– / Night Lock – Master. CAUTION: If the presented Void– / Add– / Night Lock – Masters are already in memory, this procedure will void them! Siemens Building Technologies Fire Safety & Security Products Declare... -
Page 11: Change Program Master
Any new / unknown badge can be declared as new Program Master. If change Program Master function is not desired, just present the old Program Master again the necessary number of times to get to the desired programming step. Siemens Building Technologies Fire Safety & Security Products Declare new Enter... -
Page 12: Add New User Badge
Any SiPass badge can be added, except those that are already in memory. Keep records of the ID numbers and functions of all badges. Lost badges can be voided from memory by number, using an optional Remote Programmer. See Appendix. Siemens Building Technologies Fire Safety & Security Products Add new Enter... -
Page 13: Void User Badge
Read Open Closed Night lock Void Program Void Master Fig. 6 Any badge can be voided, except Master badges. Siemens Building Technologies Fire Safety & Security Products Enter Void Void Mode user badges, one by one Read Read Open... -
Page 14: Set Night Lock Mode
Badges that are added to memory during Night Lock Mode are entered into memory as Special User Tags, to be granted access both in Night Lock Mode and in Normal Access Mode. Siemens Building Technologies Fire Safety & Security Products Normal... -
Page 15: Unset Night Lock Mode
Void Program Night Lock Master Fig. 8 In case of power failure, SiPass standalone will memorize the current status of the Night Lock. Siemens Building Technologies Fire Safety & Security Products Access Unset (function depends Night Lock on settings) Read... -
Page 16: Add Special User Badge
Night Lock). Keep records of the ID numbers and functions of all badges. Lost tags can be voided from memory by number, using an optional Remote Programmer. See Appendix. Siemens Building Technologies Fire Safety & Security Products Enter Add new... -
Page 17: Declare Remote Programmer
Program mode. After this, SiPass standalone will resume its normal opera- tion. Normal operation Read Open Closed Night lock Void Program Program Master Fig. 10 Siemens Building Technologies Fire Safety & Security Products Enter Add Remote Program Mode Programmer Read Read Open Open Closed Closed... -
Page 18: Void Badge With A Remote Programmer
Leading 0’s of the ID number need not be entered (004290621 can be entered as 4290621). If the User Programmer is missing or damaged, ask the supplier to perform void- ing with his backup Programmer. Siemens Building Technologies Fire Safety & Security Products Enter Void Mode... -
Page 19: Appendix
Appendix 17.1 Tag registration list ID Number Siemens Building Technologies Fire Safety & Security Products Masters Program Master Void Master Add Master Nightlock Master Remote Programmers Users Appendix Date 02.2005... - Page 20 Fire & Security Products GmbH & Co. oHG D-76181 Karlsruhe www.sbt.siemens.com Document no. A24205-A335-B241 Edition 02.2005 © 2005 Copyright by Siemens Building Technologies AG Data and design subject to change without notice. Supply subject to availability. Printed in the Federal Republic of Germany on environment-friendly chlorine-free paper.