Table of Contents
username and/or password, and not for triggered events. This email text box is optional, so it is not
required.
Confirm Email: Confirm Email, if used.
Login Screen: If this option is disabled, it will take them directly to the default with only read only access.
Guest Mode: Select to Disable/Enable "Guest Mode" button login. If this is disabled, it will not be
displayed in the "log in: screen. If this button is enabled, when pressed, it will direct the user to the default
with only read only access.
o
Guest Mode and Log In Screen Enabled: Get both options when IP address is entered in URL.
Fig. A.
o
Guest Mode Enabled, Log In Screen Disabled: User directed straight to default with read only
access when IP address is entered in URL. See Fig. B.
o
Guest Mode Disabled, Log In Screen Enabled: User will only get the Log In button when IP
address is entered in URL. See Fig. C.
A
Press "Next"
FIRT TIME SETUP – RemotEye 4 Settings (See Figure 5-4 )
System Name: Enter System name. (Default: "TOSHIBA")
System Contact: Enter System Contact. (Default: "Technical Support Team")
System Location: Enter system location. (Default: " ")
IP Address: Enter "IPv4 Address" – Display default IP, or the assigned IP address from BOOTP/DHCP
server or from the console settings setup. (Default: 192.168.1.168)
Gateway Address: Enter Gateway Address - Display default gateway IP, or the assigned Gateway IP
address from BOOTP/DHCP server or from the console settings setup. (Default: 192.168.1.1)
Subnet Mask: Enter "Subnet Mask" - Display default Subnet Mask, or the assigned Subnet Mask from
BOOTP/DHCP server or from the console settings setup. (Default: 255.255.255.0)
DNS Address: Enter "DNS Address" IP address – Display default DNS Address 0.0.0.0, or the assigned
DNS address from a BOOTP/DHCP server or from the console settings setup. (Default: 0.0.0.0)
IPv6 Link-Local Address: Enter "IPv6 Link-Local Address" – Display default IPv6 Link-Local address,
or the assigned IPv6 Link-Local address from BOOTP/DHCP server or from the console settings setup.
(Default: FE80::2E0:D8FF:FExx:xxxx the last six "x" is the mac address)
IPv6 Global Address: Enter "IPv6 Global Address" – Display default IPv6 Global Address, or the
assigned IPv6 Global Address from BOOTP/DHCP server or from the console settings setup.
RemotEye 4 User Manual – 90988-007
B
Figure 5-3 Login/Guest Mode Settings
C
37
- Quick Links:
- Http Web Access
Hide quick links:
Table of Contents
