Replacing The Display Panel; Procedure - Dell Inspiron 24 5000 All-in-One Service Manual

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your

your

computer. For more safety best practices, see the Regulatory Compliance home page at

regulatory_compliance.

1

Place the display panel on the middle frame and display-assembly base.

NOTE:

Ensure the display cable has been fully threaded to the slot on the display-assembly base.

2

Route the touchscreen cable through the routing guide on the display-assembly base.

3

Slide the display-backlit cable through the slot on the display-assembly base.

4

Slide the display cable through the slot on the display-assembly base.

5

Push the display panel towards the display-assembly base.

6

Close the gap between the display panel and the middle frame.

7

Place the display-assembly base on a clean and flat surface with the display panel facing down.

8

Replace the ten screws (M3x5) in the sequence as shown in the image, that secure the display panel to the middle frame and display-

assembly base.

NOTE:

The screws that secure the middle frame and display panel to the display-assembly base are silver in color and

etched with "LCD" around the screw holes.

80

Replacing the display panel

computer. After working inside your computer, follow the instructions in

49

After working inside

www.dell.com/