WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the stand.
2
Remove the
back
cover.
3
Remove the
system-board
Procedure
NOTE:
The size and configuration of the camera module may vary depending on the configuration ordered.
1
Disconnect the camera cable from the system board.
2
Remove the two screws (M3x5) that secure the retractable-camera assembly door to the middle frame.
3
Lift the retractable-camera assembly door out of the middle frame.
4
Remove the two screws (M3x5) that secure the retractable-camera assembly bracket to the middle frame.
5
Slide and lift the retractable-camera bracket off the middle frame.
6
Press the top of the retractable-camera assembly to extend the retractable camera.
computer. After working inside your computer, follow the instructions in
shield.
Removing the camera
www.dell.com/
Removing the camera
14
After working inside
31