Removing The Antennas; Prerequisites; Procedure - Dell Inspiron 24 5000 All-in-One Service Manual

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your

your

computer. For more safety best practices, see the Regulatory Compliance home page at

regulatory_compliance.

1

Remove the stand.

2

Remove the

back

cover.

3

Remove the

system-board

4

Remove the

wireless

card.

5

Remove the

base

panel.

6

Remove the

rear-I/O

bracket.

7

Remove the speakers.

NOTE:

Note the routing of the antenna cables, before removing the antenna cables form the routing guides. Also, note the

location of the antenna modules printed on the display-assembly base as ANT-B (black) and ANT-W (white).

1

Remove the antenna cables from the routing guides on the display-assembly base.

2

Remove the two screws (M2x2.5) that secure the antenna modules (2) to the middle frame.

3

Carefully peel the tape that secures the antenna cables (2) to the middle frame.

4

Release the antenna modules (2) from the tabs and lift the antenna modules off the middle frame.

44

computer. After working inside your computer, follow the instructions in

shield.

Removing the antennas

www.dell.com/

24

After working inside