Table of Contents
View the Module Tags
6. Click OK or Apply for the new channel configuration to take effect.
If desired, you can apply configuration changes to the first channel, as
TIP
described in
configuration.
We recommend that you copy channel configuration before applying the
changes. In this manner, the controller sends the changes to the module only
once and, therefore, needs to make only one connection to the module.
When you create a module, the Logix Designer application creates a set of tags
that you can view in the Tag Editor. Each configured feature on your module has
a distinct tag that is available for use in the controller's programming logic.
Complete these steps to access the tags in a module.
1. In the Controller Organizer, right-click Controller Tags and choose
Monitor Tags.
The Controller Tags dialog box appears with data.
2. Click the + symbols to view module tags as shown in the
following graphic.
For more information on module tags, see Appendix A,
Definitions on page
181.
Rockwell Automation Publication 1756-UM540E-EN-P - December 2017
Configure ControlLogix Analog I/O Modules
step
3, before moving to the next step and copying channel
Chapter 7
Analog I/O Module Tag
141
Hide quick links:
Table of Contents
Troubleshooting
