Table of Contents
Switch Specifications
RJ-45 Module Connectors
The RJ-45 connector connects Category 3, Category 5, Category 5e, Category 6, or Category 6A foil twisted-pair
or unshielded twisted-pair cable from the external network to the following module interface connectors:
• Supervisor modules
• Fabric Extenders (Cisco Nexus 2232PP, 2232TM, 2232TM-E, 2248PQ, 2248TP, and 2248TP-E FEXs)
Caution
To comply with GR-1089 intrabuilding, lightning immunity requirements, you must use a foil twisted-pair
(FTP) cable that is properly grounded at both ends.
The following figure shows the RJ-45 connector.
Figure 42: RJ-45 Connector
1
Power Supply Cable Specifications
Note
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a non-compatible power cord with this product may result in electrical
safety hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered
with the system.
OL-31330-01
• CONSOLE port
• MGMT ETH port
• 100/1000 downlink ports
Cisco Nexus C2348UPQ FEX
• 1000/10000 downlink ports
Cisco Nexus C2348TQ-10GE FEX
• 100/1000/10000 downlink ports
Pin 1
2
Pin 2
Cisco Nexus 7706 Hardware Installation Guide
RJ-45 Module Connectors
143
Table of Contents
