Table of Contents
1
C H A P T E R
Overview
This chapter includes the following sections:
•
Overview of the Cisco Nexus 7706 Switch Installation Features, on page 1
Overview of the Cisco Nexus 7706 Switch Installation Features
The Cisco Nexus 7706 chassis has six slots for one or two supervisor modules and up to four I/O modules.
The chassis also holds up to six fabric modules, up to four AC or DC 3-kW and 3.5-kW HVAC/HVDC power
supplies, and three fan trays. To group the many networking cables for each I/O module on this chassis, you
can install cable management frames on either side of the chassis. You can install an optional locking front
door and you can install an optional set of air filters on the front door and cable management frames. The
following figure shows the standard hardware features seen from the front of the chassis.
Figure 1: Standard Hardware Features on the Front of the Cisco Nexus 7706 Chassis
Cisco Nexus 7706 Hardware Installation Guide
OL-31330-01
1
Table of Contents
