Chapter 3. Initial Setup and Programming
3.4.5 Program Review
The Program Review menu requires no user password. However, it provides view-only access to the screens. To
change any setting or parameter, you must enter the Program Menu and supply the correct password.
3.4.6 Program
IMPORTANT: The measurement will stop and the output will go to error level when you enter Program (configure)
mode.
Display
Display Format
Program
Program Review
Keypad Lockout
Enter the password
9999
]UNDO [
]SAVE
]MOVE
]MODF
34
To enter the Programming menu, on the
highlight
and press [√]. The following screen appears.
Program
To enter the password, use the [] or [] arrow key to select each digit to be
changed and the [] or [] arrow keys to change the value of the selected
number. When the password number is correct, press
screen appears. The password is 1111.
Preference
menu, use the arrow keys to
Display
and the
[
]
AT600 User's Manual
User