Table of Contents
Make Connections for 1732ES
Modules
See the Ethernet Design Considerations Reference Manual, publication
ENET-RM002, for information about Ethernet cable.
Power Connections
This section describes the power connectors and recommended cables.
Table 12 - Power Connector Pin
Description
Pin No.
Signal
1
Output +24V DC power
2
Input +24V DC power
3
Input power, common
4
Output power, common
(1) Not required for 1732ES-IB16 modules.
Table 13 - Recommended Power Cables
Description
Mini right angle female to flying leads cord set
Mini straight female to flying leads cord set
Mini right angle male to flying leads cord set
Mini straight male to flying leads cord set
Mini right angle male to right angle female patch cord
Mini straight male to straight female patch cord
(1) Replace -6F (1.8 m [6 ft]) with -12 (3.7 m [12 ft]) or -20 (6.1 m [20 ft]) for additional standard cable lengths.
(2) Replace -2 (2 m [6.6 ft]) with -5 (5 m [16.4 ft]) or -10 (10 m [32.8 ft]) for additional standard cable lengths.
See
http://www.ab.com/en/epub/catalogs/6005557/6005561/10508712/
10513424/10513435/Introduction.html
Power Pass Through
The power that the module requires is supplied via a 4-pin mini-style
connector system. The module receives its required power through the male
connector on the left. A female connector on the right is also provided so that
power can be daisy chained from module to module.
IMPORTANT Use power pass through (daisy chaining of power) only for 'de-energize to
trip' (safety state = OFF) applications.
Rockwell Automation Publication 1791ES-UM001G-EN-P - November 2016
Male Input
(mates to female cable end)
(1)
(1)
Cat. No.
889N-R4AFC-6F
889N-F4AFC-6F
889N-E4AFC-6F
889N-M4AFC-6F
889N-R4AFNE-2
889N-F4AFNM-2
for more information.
Install the Module
Chapter 3
Female Output
(mates to male cable end)
(1)
(1)
(1)
(1)
(2)
(2)
55
- Quick Links:
- Set the Ip Address
Hide quick links:
Table of Contents
