Bios Setup Settings - Siemens SIMATIC IPC477D Operating Instructions Manual
Hide thumbs
Also See for SIMATIC IPC477D:
- Operating manual (54 pages) ,
- Quick install manual (2 pages) ,
- Operating instructions manual (210 pages)
Table of Contents
8.6.5
BIOS Setup settings
Documenting your device configuration
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
Note
Print out the table below and keep the pages in a safe place once you made your entries.
BIOS Setup default settings
System parameters
Main
System Time
System Date
Advanced
HPET – HPET support
Boot configuration
Numlock
Peripheral Configuration
Internal COM 1
Base I/O address
Interrupt
Internal COM 2
Base I/O address
Interrupt
PCI - MPI/DP
Profinet
CAN
Base I/O address
Interrupt
Azalia internal HDMI codec
On-board Ethernet 1
Ethernet 1 Address
Onboard Ethernet 2
Ethernet 2 address
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF
1)
4)
2)
2)
3)
3)
Defaults
hh:mm:sss
MM/DD/YYYY
Auto
On
Auto
3F8
IRQ4
Auto
2F8
IRQ3
Enabled
Enabled
Auto
5400
IRQ5
Enabled
Enabled
00:1B:1B:41:42:7B
Enabled
00:1B:1B:0A:85:10
Technical information
8.6 BIOS description
Custom entries
251
- Quick Links:
- Product Description
Hide quick links:
Table of Contents
