Installing And Removing A Cfast Card; Installing And Removing A Cfast Card (External Slot) - Siemens SIMATIC IPC477D Operating Instructions Manual
Hide thumbs
Also See for SIMATIC IPC477D:
- Operating manual (54 pages) ,
- Quick install manual (2 pages) ,
- Operating instructions manual (210 pages)
Table of Contents
Expanding the device and assigning device parameters
6.6 Installing and removing a CFast card
6.6
Installing and removing a CFast card
6.6.1
Installing and removing a CFast card (external slot)
A slot for a CFast card is located on the bottom of the device. Installing and removing the
CFast card is the same for all device variants.
Use only SIMATIC IPC CFast cards for industrial application.
Note
Note the following points:
• Use the slot described here exclusively for a CFast card.
• Do not insert CompactFlash cards (CF cards) into the slot for the CFast card.
• Always replace the SIMATIC IPC CFast card with a SIMATIC IPC CFast card of the same
production version or higher. For the SIMATIC IPC477D, only SIMATIC CFast cards with
production version 02 or higher may be used.
The production version can be found on the SIMATIC IPC CFast card, see the section
"Accessories (Page 32)".
Requirements
● The device is disconnected from the power supply.
● PRO device only: The connection compartment cover is open (see section "Opening and
closing the terminal compartment cover (Page 88)").
● SIMATIC IPC A CFast card that is approved for industrial use.
144
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF
- Quick Links:
- Product Description
Hide quick links:
Table of Contents
