Dell S4048–ON Configuration Manual page 542
Hide thumbs
Also See for S4048–ON:
- Configuration manual (1039 pages) ,
- Deployment manual (78 pages) ,
- Troubleshooting manual (29 pages)
Table of Contents
To advertise TLVs, use the following commands.
1
Enter LLDP mode.
CONFIGURATION or INTERFACE mode
protocol lldp
2
Advertise one or more TLVs.
PROTOCOL LLDP mode
advertise {dcbx-appln-tlv | dcbx-tlv | dot3-tlv | interface-port-desc | management-tlv |
med }
Include the keyword for each TLV you want to advertise.
•
For management TLVs: system-capabilities, system-description.
•
For 802.1 TLVs: port-protocol-vlan-id, port-vlan-id vlan-name.
•
For 802.3 TLVs: max-frame-size.
•
For TIA-1057 TLVs:
•
guest-voice
•
guest-voice-signaling
•
location-identification
•
power-via-mdi
•
softphone-voice
•
streaming-video
•
video-conferencing
•
video-signaling
•
voice
•
voice-signaling
In the following example, LLDP is enabled globally. R1 and R2 are transmitting periodic LLDPDUs that contain management, 802.1, and
802.3 TLVs.
Figure 80. Configuring LLDP
542
Link Layer Discovery Protocol (LLDP)
Table of Contents
Troubleshooting
