NEC SL2100 Getting Started Manual page 6

SL2100 GETTING STARTED GUIDE

System knockout panels are only allowed to be cut using side cutters. Box cutter/knife is

not allowed to be used.

If liquid reaches the inside of the system or the main power source, turn off the power.

Operating the system in this state might cause a fire, an electrical shock, or a system

failure.

Do not touch the internal parts of the main power source to disassemble or configure it.

This action may cause a fire, an electrical shock or a system failure.

NEC Corporation does not take any responsibility for disassembled or reconfigured

equipment.

Do not put any container objects (such as a vase or a cup) on the main power source or

any peripheral equipment. It might cause a fire, an electrical shock or a system failure.

Be sure to use cables designated by NEC or cables attached to the equipment. If cables

are not designated particularly, choose cables with considering safety and transmission

performance carefully. Ask the dealer or your local agency if needed.

Do not tamper with, modify, forcefully bend, forcefully remove or twist an electrical cord or

any wiring to or from the system, the main power source or any peripheral equipment. It

might cause a fire, an electrical shock, or a system failure. If the wiring is damaged,

contact the dealer.

Correctly insert all of the electrical plugs into the electrical outlets. Before inserting a plug

into an electrical outlet, ensure that there is no dust on the plug's blades. If there is dust

on a blade, it might cause a fire.

Do not use power other than the power that was designated for the system when it was

installed.

Do not attempt to repair or move the main power source without assistance from the

dealer.

Do not put any metal or combustible objects into a vent of the system, the main power

source, or any peripheral equipment. Operating the system in this state might cause a

fire, an electrical shock, or a system failure. If this occurs, turn off the power and contact

the dealer.

Be careful when using any peripheral equipment's Liquid Crystal Display (LCD). If the

liquid leaks, it can be harmful to the user and to the system.

Before connecting any non-NEC, customer-provided equipment, check with the supplier

to ensure that the equipment is compatible. If the supplier cannot confirm the

compatibility, do not connect the equipment. Connecting incompatible equipment might

cause a fire or an electrical shock.

2