Page 2
Showline. Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The use of this document for all other purposes is specifically prohibited. Document Number: SL SUNLED 10 User’s Manual Version as of: 24-004-3808-00 Rev1.0 SL SUNLED 10 LED Luminaire installation & User’s Manual 2016 Philips Group. All rights reserved.
SL SUNLED 10 LED Luminaires Installation & User’s Manual Warnings and Notices When using electrical equipment, basic safety precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. Do not use outdoors. Do not mount near gas or electric heaters. Equipment should be mounted in locations and at heights where it will not readily be subject to tampering by unauthorized personnel.
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires TABLE OF CONTENTS TABLE OF CONTENTS PREFACE ............................About this Manual .............................. Included Items SL SUNLED 10 LED LUMINAIRE OVERVIEW ..................SL SUNLED 10 LED Luminaire Components ........................Major Luminaire Components LCD Display / Menu System ........................
SL SUNLED 10 LED Luminaires Installation & User’s Manual PREFACE 1. About this Manual The document provides installation and operation instructions for the following products: S L SUNLED 10 LED Luminaire Please read all instructions before installing or using this product. Retain this manual for future reference. Additional product information and descriptions may be found on the product specification sheet.
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires SL SUNLED 10 LED LUMINAIRE OVERVIEW 1. SL SUNLED 10 LED L u minaire Components Major Luminaire Components High Intensity LED Array Yoke(Tilt) Position Locking handle Top view without yoke AC Input AC Output LCD Display/Menu System...
SL SUNLED 10 LED Luminaires Installation & User’s Manual LCD Display / Menu System Edit a Preset Edit a Chase Home(menu settings) DMX512 Addressing Retrn to Main Screen LCD Display SL SUNLED 10 Professional LED Strobe DOWN Arrow Button LEFT Arrow Button UP Arrow Button RIGHT Arrow Button CHECK MARK(Accept) Button...
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires INSTALLATION AND SET UP 1. Power Requirements The SL SUNLED 10 LED Luminaire operates on AC input voltages from 100 to 240 V AC. W ARNING! This unit does not contain an ON/OFF switch. Always disconnect power input cable to completely remove power from unit when not in use.
SL SUNLED 10 LED Luminaires Installation & User’s Manual LED Luminaire AC Input Connections SL SUNLED 10 Table 2: POWER POWER INPUT: INPUT (10A max.) THRU 100-240V~, 50/60Hz. Back of Unit AC Input AC Output Figure 3: SL SUNLED 10 LED Luminaire AC Input & Output Connections CAUTION: In the event the AC input cable of this luminaire is damaged, it must be replaced, by the user, with an approved cable through an Authorized Dealer or Service Center.
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires DMX512 DMX512 (out to the next DMX512 (out from first control device) luminaire or DMX512 to second luminaire) controlled device) Figure 5: SL SUNLED 10 LED Luminaire - DMX512 Connections 4.
SL SUNLED 10 LED Luminaires Installation & User’s Manual OPERATION AND PROGRAMMING 1. LCD Display and Menu System The SL SUNLED 10 LED Luminaire’s LCD Display and Menu System provides local control for accessing the following fixture’s settings: Presets (Standard and User Defined) Effects(Chases - preloaded and user defined) Settings Lock fixture...
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires 3. Quick Selection Buttons When in Manual Mode, the SL SUNLED 10 can be accessed via the on-board LCD menu system or via three quick select buttons: Edit a Preset Button Edit a Chase Button DMX Address Button Edit a Preset Button...
S_Curve Square Curve Linear Curve PL_Curve * DMX Value DMX Value *PL Curve follows the dimming curve of Philips Selecon PL series LED luminaries. S_Curve Square Curve DMX Value DMX Value Figure 9: SL SUNLED 10 LED Luminaire Dimmer Curves...
SL SUNLED 10 LED Luminaires Installation & User’s Manual 6. Master / Slave Operational Mode The Master / Slave Operational Mode allows one SL SUNLED 10 LED Luminaire to act as the "Master" unit and all other connected units are controlled by this unit. When a unit is set to "Slave" mode, it will only listen to and follow any commands sent from a "Master"...
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires DMX CONTROL 1. CHASE This section contains information for CHASE of the luminaire. The figure below shows the ON/OFF status of each each step thru Program 1-10 for all the LEDs. Detailed Chase Speed please refer to the SL SUNLED 10 CHASE SPEED DETAILS on page Figure 11: SL SUNLED 10 LED Luminaire - CHASE...
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires SL SUNLED 10 LED Luminaire RDM Parameter IDs The following tables outline and describe all the RDM parameters IDs associated with SL SUNLED 10 LED Luminaires. Table 6, “SL SUNLED 10 LED Luminaire RDM Product Parameters IDs” Table 7, “...
Installation & User’s Manual SL SUNLED 10 FX LED Luminaires CLEANING AND CARE W ARNING! All cleaning should be performed with power completely removed from the luminaire. Never remove protective covers when the luminaire is powered. Wear appr opriate protective eye wear and gloves when cleaning the luminaire.
SL SUNLED 10 LED Luminaires Installation & User’s Manual TECHNICAL SPECIFICATIONS 1. SL SUNLED 10 LED Luminai r e Operational Specifications WW LED Array Source: 16 Degrees Beam Angle: Light Output: > 6,000 lumens 2700K Color Temperature: Input Voltage (AC): 100V to 240V (+/- 10%, auto-ranging)(120V, 50/60Hz is for US and Canada Only) 1.5 Amps (100V) / 0.62 Amps (240V) Current (AC):...