Table of Contents
6
BUFFER MEMORY
6.15
CH1 Trigger Data (Un\G36)
An address of buffer memory monitoring a level trigger for the occurrence is set during the
logging facility use. (Refer to Section 4.2.7 (3).)
For information on the buffer memory for CH2 or later, refer to Section 6.1 (1).
(1) Setting method
(2) Default
6.16
CH1 Trigger Setting Value (Un\G37)
A value that makes level triggers work is set during the logging facility use. (Refer to
Section 4.2.7 (3).)
For information on the buffer memory for CH2 or later, refer to Section 6.1 (1).
(1) Setting method
(2) Default
6
- 19
6.15 CH1 Trigger Data (Un\G36)
(a) Set an address of buffer memory storing data to be monitored by using the buffer
memory.
• Settable range: 0 to 1999
(b) Set Operating condition setting request (Y9) to on to activate the setting. (Refer to
Section 5.2.2 (3).)
Table 6.17 Default of CH1 Trigger data (Un\G36)
Channel
Description
CH1
102
CH2
302
CH3
502
CH4
702
POINT
Set adequate monitoring data such as digital output values, scaling values, and
level data for trigger data. The other data settings do not guarantee the normal
operation of the Q64AD2DA.
[Example]
(a) Set a value that makes level triggers work by using the buffer memory.
• Settable range: -32768 to 32767
(b) Set Operating condition setting request (Y9) to on to activate the setting. (Refer to
Section 5.2.2 (3).)
The value 0 is set for all the channels (CH1 to CH4) in default configuration.
Corresponding buffer
memory
Scaling value
Setting area (
Pr
)
System area
- Quick Links:
- A/D Conversion Methods
- Wiring
Hide quick links:
Table of Contents
Troubleshooting
