Codabar - Honeywell Xenon 1900 User Manual
Area-imaging scanners
Hide thumbs
Also See for Xenon 1900:
- User manual (360 pages) ,
- Quick start manual (21 pages) ,
- User manual (376 pages)
Table of Contents
Codabar
Codabar On/Off
Codabar Start /Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters. Default = Don't Trans-
mit.
Codabar Check Character
Codabar check characters are created using different "modulos." You can program
the scanner to read only Codabar bar codes with Modulo 16 check characters.
Default = No Check Character.
No Check Character indicates that the scanner reads and transmits bar code data
with or without a check character.
When Check Character is set to Validate and Transmit, the scanner will only read
Codabar bar codes printed with a check character, and will transmit this character
at the end of the scanned data.
Xenon/Granit User Guide
* On
Transmit
Off
* Don't Transmit
179
- Quick Links:
- Connect with Usb
Hide quick links:
Table of Contents
Troubleshooting
