MEANINGS OF SYMBOLS NOTE: Some units do not carry them Symbols WARNING The following show symbols used for the machine. Be sure that you understand their meaning before use. It is important that you read, fully understand and observe the Shows maximum shaft...
WHAT IS WHAT? Since this manual covers several models, there may be some diff erence between pictures and your unit. Use the instructions that apply to your unit. 1. Fuel cap 9. Ignition switch 2. Throttle lever 10. Harness 3. Starter handle 11.
If situations occur which are not covered in this manual, take ○ Wipe up all fuel spills before starting engine. care and use common sense. Contact a HITACHI dealer if ○ Move at least 3 m away from fueling site before starting you need assistance.
CAUTION Do not disassemble the recoil starter. You may get a possibility of personal injury with recoil spring. SPECIFICATIONS MODEL CG40EAS 39.8 Engine Size (ml) NGK BPMR6A Spark Plug 1.00 Fuel Tank Capacity (l) Dry Weight (kg) Sound pressure level LpA (dB (A)) (EN27917) Measured sound power level LwA 108.8...
50:1, please consult the oil bottle for the ratio or ○ When attaching the guard extension to the blade guard, HITACHI dealer. the sharp line limiter must be removed from the blade ○ If genuine oil is not available, use an anti-oxidant added guard.
○ If cutting attachment should strike against stones or If the cutting attachment still rotates after idle speed other debris, stop the engine and make sure that the adjustment, contact a HITACHI dealer. attachment and related parts are undamaged. When NOTE grass or vines wrap around attachment, stop engine Standard Idle rpm is 2500 –...
Page 20
○ When replacing the blade, purchase one recommended ○ Rinse the fuel tank with gasoline. by HITACHI, with a 25.4 mm fi tting hole. ○ Clean the exterior of the carburetor and the space ○ When installing saw blade, always face the stamped around it.
Page 28
服务中心 日立工机商业 (中国) 有限公司 上海市长宁区遵义路100号 虹桥上海城B栋2686-2689室 制造商 山东华盛农业药械股份有限公司 临沂市高新区中天路1号 Hitachi Koki Co., Ltd. Code No. E99003421 A Printed in China...