Power Cord Operation - Black & Decker BPACT08 SERIES Instruction Manual

SAFETY INFORMATION

The power supply cord contains a current device that senses damage to the power

cord. To test your supply cord follow these steps:

1. Plug in the Air Conditioner.

2. The power supply cord head has two buttons, a TEST button and a RESET

button. Press the TEST button and notice a click as the RESET button pops out.

3. Press the RESET button. Once again notice a click as the button engages.

4. The power supply cord will now supply electricity to the unit.

NOTE:

• Do not use this device to turn the unit on or

off.

• Always make sure the reset button is pushed

in for correct operation

• The power supply cord must be replaced if

it fails to reset when either the test button is

pushed, or it cannot be reset.

• If power supply cord is damaged, it cannot

be repaired.

• It must be replaced by one obtained from

the product manufacturer.

• After the unit has stopped, the compressor

operate for the first 3 minutes. This is to

protect the unit. Operation will automatically start after 3 minutes.

OPERATING CONDITION

The air conditioner must be operated within the temperature range indicated below:

NOTE: · Unit performance may be affected when in use outside of these operating temperatures.

MODE

COOL

DRY

ROOM TEMPERATURE

64˚F (18˚C) ~ 95˚F (35˚C)

64˚F (18˚C) ~ 95˚F (35˚C)

Page 7