Table of Contents
5.4 General-purpose output function
Using this general-purpose output function, it turns on or off the output by writing 0 (OFF) or 1(ON) to
the designated data register via communication. When it turns on, data register is started with 0 (OFF).
*It doesn't work with the on-time and off-time set to under 0.1s.
●Operation mode
・Level output
When the designated data register is 1(ON), it turns on the output.
When the designated data register is 0(OFF), it turns off the output.
・Repeat cycle output
When the designated data register is 1(ON), it starts a repeat cycle operation.
During a repeat cycle operation, it repeats on and off according to the setting output ON-time (t1)
and output OFF-time (t2).
・One-shot output
When the designated data register is 1(ON), it turns on the output.
After passing the setting output ON-time (t1), the data register will be 0 (OFF) and it will turn off
the output. Even if it writes 1(ON) before passing the setting output ON-time, it rejects the writing.
(It doesn't reset the setting ON-time.)
50
KW2G/ KW2G-H Eco-POWER METER
Table of Contents
