To Open The Switch Box Cover Of The Indoor Unit; Mounting The Indoor Unit; About Mounting The Indoor Unit; Precautions When Mounting The Indoor Unit - Daikin EGSQH10S18AA9W Installer's Reference Manual
Altherma ground source heat pump
Hide thumbs
Also See for EGSQH10S18AA9W:
- Service manual (168 pages) ,
- Installation manual (28 pages) ,
- User reference manual (24 pages)
Table of Contents
7 Installation
4
4×
5
2
7.2.3
To open the switch box cover of the
indoor unit
7×
7.3
Mounting the indoor unit
7.3.1
About mounting the indoor unit
When
You have to mount the indoor unit before you can connect the brine
and water piping.
Typical workflow
Mounting the indoor unit typically consists of the following stages:
1
Installing the indoor unit.
Installer reference guide
24
2
2×
1
7.3.2
Precautions when mounting the indoor
unit
INFORMATION
Also read the precautions and requirements in the
following chapters:
▪ General safety precautions
▪ Preparation
7.3.3
To install the indoor unit
1 Bring the unit on the pallet as close as possible to its installation
place.
2 Lift the indoor unit from the pallet and place it on the floor.
4×
2
1
3 Slide the indoor unit into position. Make sure that the side
support bolts are present when handling the unit.
4 Unlink the heat pump module from the outer frame. ONLY
remove the side support bolts!
210kg
2×
EGSQH10S18AA9W
Daikin Altherma ground source heat pump
4P351748-1D – 2016.02
Table of Contents
