Present System Status (H4) - Panasonic EBL512 G3 User Manual

Panasonic Eco Solutions Nordic AB

MEW01603 Rev: -

7

Print

Menu

If the c.i.e. has a printer it is possible to get a print-out from some of

the sub menus U1-U8.

If it is possible to get a print-out, the Soft key "Print" is shown and

shall be used to start the print-out.

During printing the same Soft key might change to "Abort printing".

NOTE! After pressing the Soft key "Abort printing" it will change

back to "Print" but the printing might continue for a few seconds.

If the list in the selected menu is empty, "

be shown.



Press the Soft key "Menu".



With the keypad select 0, 1, 2 - - 8 or 9 for a User name.



Type the Password for that user name. (Six digits. * * * * * *)

H1 Perform monthly test



Press (  ) three times to highlight menu H4.

H4 Present system status



Press ( ). A sub menu list (U1 – U8) will be displayed.

Disable zone

U1 Disablement

U2 Disablement by time channel

U3 Open doors

U4 Sensor values

U5 Sensors activating SERVICE signal

U6 Technical warning

U7 Event log

U8 Information

➏ To open the sub menu respectively, see the following chapters.

EBL512 G3 version 2.0.x, Daily user's manual

- - - List is empty - - -

15

" will

B1