Keyboard Base System Board - HP Elite x2 1011 G1 Maintenance And Service Manual
Hide thumbs
Also See for Elite x2 1011 G1:
- User manual (103 pages) ,
- Maintenance and service manual (124 pages) ,
- Quickspecs (39 pages)
Table of Contents
1.
Release the ZIF connector (1) to which the smart card reader board cable is attached, and then
disconnect the smart card reader board cable from the keyboard base connector board.
2.
Release the ZIF connector (2) to which the connector board cable is attached, and then disconnect
the connector board cable from the keyboard base system board.
3.
Remove the two Phillips PM2.0×3.6 screws (3) that secure the connector board and bracket to
the top cover.
4.
Remove the connector board bracket (4).
The connector board bracket is included in the Keyboard Base Bracket Kit, spare part number
793728-001.
5.
Remove the connector board (5) and cable.
Reverse this procedure to install the connector board.
Keyboard base system board
Description
Keyboard base system board (includes docking/adapter port, USB port, and audio jack)
Before removing the keyboard base system board, follow these steps:
1.
Shut down the keyboard base. If you are unsure whether the keyboard base is off or in Hibernation, turn
the keyboard base on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the keyboard base.
3.
Disconnect the power from the keyboard base by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the keyboard base.
84
Chapter 6 Removal and replacement procedures – Keyboard base
Spare part number
806252-001
- Quick Links:
- Product Description
- Keyboard Base
Hide quick links:
Table of Contents
