Show Diagnosis - Fujitsu ETERNUS DX80 S2 Cli User's Manual
Disk storage systems
Hide thumbs
Also See for ETERNUS DX80 S2:
- User manual (186 pages) ,
- User's manual & installation instructions (147 pages) ,
- Overview (97 pages)
Table of Contents
Chapter 5 Information Settings and Display
5.4 Utility > show diagnosis
show diagnosis
This command displays either the bad data information for all of the volumes or for the specified volume(s).
■
Syntax
show diagnosis -type { disks [ -disks {all | disks} ] |
raid-groups [-rg-number
■
Parameter
-type
-rg-number
or
-rg-name
-disks
■
Output
Summary results of the disk diagnosis
Diagnosis Status
Progress
Method
Diagnosis Count
Location
Diagnosis Status
Result
rg_numbers
| -rg-name
This parameter specifies the type of diagnostic results to be displayed. Only one type can be
displayed by a single command.
disks
The diagnostic results of disks
raid-groups The diagnostic results of RAID groups
Optional. This parameter specifies the RAID group identifiers to be displayed and can only be
specified in conjunction with the "-type raid-groups" parameter. One or more RAID groups can
be specified at the same time. For details, refer to
omitted, all the RAID groups are selected.
Optional. This parameter specifies the disks to display more detailed diagnostic results of the
disks and can only be specified in conjunction with the "-type disks" parameter. One or more
disks can be specified at the same time. For details, refer to
omitted, a summary list of all the disks is displayed.
all
Detailed diagnosis results of all the disks.
Diagnosis status
Diagnosis progress
Diagnosis mode
Loop count for diagnosis
Disk number
Executing status
Diagnosis result
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
rg_names
] }
"1.2.8 RAID Group Syntax" (page
659
22). If
"1.2.3 Disk Syntax" (page
19). If
P2X0-1030-09ENZ0
- Quick Links:
- Accessing Cli
Hide quick links:
Table of Contents
