Fujitsu ETERNUS DX80 S2 Configuration Manual Server Connection

Server connection disk storage system
Hide thumbs Also See for ETERNUS DX80 S2:

Quick Links

P3AM-5352-11ENZ0
FUJITSU Storage
ETERNUS DX
Configuration Guide -Server Connection-
(SAS) ETERNUS DX80 S2/DX90 S2 Disk Storage System Settings
Table of Contents
loading

Summary of Contents for Fujitsu ETERNUS DX80 S2

  • Page 1 P3AM-5352-11ENZ0 FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) ETERNUS DX80 S2/DX90 S2 Disk Storage System Settings...
  • Page 2 This page is intentionally left blank.
  • Page 3 This manual should be used in conjunction with any other applicable user manuals, such as those for the ETERNUS DX, OS, SAS cards, and drivers. Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Notations" for the notations used in this manual such as product trademarks and product names.
  • Page 4: Table Of Contents

    2.1.5 Registering the SAS Addresses of the Accessing SAS Cards (Setting SAS Host) ............10 2.1.6 Allocating LUN Groups (Setting the Host Affinity)....................10 2.2 Specific Settings ........................... 11 2.2.1 Setting the CA Reset Groups..........................11 FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2014 FUJITSU LIMITED P3AM-5352-11ENZ0...
  • Page 5 List of Tables Table 2.1 SAS port parameter settings........................8 Table 2.2 Host response settings ..........................9 FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2014 FUJITSU LIMITED P3AM-5352-11ENZ0...
  • Page 6: Chapter 1 Workflow

    Workflow This manual is used when performing the setup procedures described in the "Setting Up the ETERNUS DX" section of the "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS)" for each OS. Required Documents ETERNUS Web GUI User's Guide •...
  • Page 7 • "2.1.6 Allocating LUN Groups (Setting the Host Affinity)" (page 10) After completing all the required procedures in this manual, follow the procedures in "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS)" for each OS. FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-...
  • Page 8: Chapter 2 Setting Up The Eternus Dx

    The server cannot recognize the ETERNUS DX LUNs unless they are assigned in this order. This restriction does not apply when the server is running a Solaris OS. FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2014 FUJITSU LIMITED...
  • Page 9: Setting The Host Responses

    Create new SAS port groups and register the ports as members of the groups. A SAS port group is a group of SAS-CA type ports that are connected to the specified host group. Configure the host affinity setting for each SAS port group. FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2014 FUJITSU LIMITED P3AM-5352-11ENZ0...
  • Page 10: Registering The Sas Addresses Of The Accessing Sas Cards (Setting Sas Host)

    Affinity may not be set correctly. In this case, trying various settings may be necessary until the server is able to recognize the ETERNUS DX logical disks. FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2014 FUJITSU LIMITED P3AM-5352-11ENZ0...
  • Page 11: Specific Settings

    Because all of the ports are configured to be members of one CA reset group in the initial setting, the reset group settings do not need to be changed. FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Copyright 2014 FUJITSU LIMITED...
  • Page 12: Fujitsu Storage Eternus Dx Configuration Guide -Server Connection

    • operational problems as the result of errors, omissions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information • in this manual.

This manual is also suitable for:

Eternus dx90 s2

Table of Contents