Auto Recording - Kenwood NX-5200 User Manual

④

Call origin (Auto Recording only)

ID information of the call origin when recording starts. "---" is displayed when no

ID information is available.

⑤

File extension

Voice files are saved as ".WAV", and GPS data files are saved as ".TXT".

Note:

The date format and time format settings do not apply to the file name.

●

When the built-in clock stops or the clock has not been set, the date saved

●

"00000000" and the time saved

The file number is determined as follows.

If there are no files in the destination folder where the file is to be saved, a file name

–

with the file number "000001" is saved.

If there are files in the destination folder where the file is to be saved, a file name with

–

the file number made up of the biggest file number of the existing files + 1 is saved.

The file numbers that can be used is 000001 to 009999.

–

Formatting the microSD card

o

1

Press the key programmed as [Format SD Card] to enter Format SD Card mode.

"You will lose all data on the card." appears on the display. Press the [ ] key.

●

2

Select "Start" and press the [ ] key to format the card.

When formatting is complete, the

●

the display. Folders for storing the recorded files are created on the microSD card.

Auto Recording records and retains your last conversation, allowing you to catch

what you may have missed hearing during the conversation.

If activated, the auto recording function will continuously record all transmitted and

received signals to the built-in memory or microSD card according to the maximum

recording length set.

The

indicator blinks while recording is in progress.

●

Note:

Recording stops when the maximum recording length is reached.

●

New recordings cannot be made when the memory in the built-in memory or microSD card

●

is full.

You can play back the voice recording in Playback mode, or delete the recording if

●

necessary.

GPS Data Storage

The GPS data is stored temporarily in the transceiver RAM at every GPS Storage

Interval from the GPS unit. The data will be written to the built-in memory and microSD

card when more than three pieces of data are collected. The stored GPS data in the

built-in memory can be sent from the transceiver via NXDN Air Protocol or can be

read on a PC.

54

will become a file number.

indicator lights up and "Complete" appears on

will become