Kenwood NX-5200 User Manual page 46

2

Press the [ ] or [ ] key to start pairing.

Alternatively, you can pressed the key programmed as [Bluetooth Connect/

Disconnect].

The LED indicator blinks in blue.

●

For Bluetooth devices that does not support Simple Secure Pairing, you need to enter

●

a Personal Identification Number (PIN) code. You need to operate the Bluetooth

headset to proceed with pairing.

When pairing is complete, your transceiver will connect to the Bluetooth headset. When

the connection is established, you can perform hands-free call.

The "

" indicator appears on the display.

●

Note:

Once the headset has been paired, it can be used automatically with the transceiver the

●

next time the transceiver and headset are powered on. If the headset cannot be used

automatically, connect manually using the My Device setting in the Bluetooth menu of the

transceiver.

(Some headset models cannot be used automatically.)

Up to 10 Bluetooth devices can be registered to your transceiver.

●

Making hands-free call

o

Press the PTT switch to activate the microphone of the Bluetooth

headset.

Note:

The volume level can only be adjusted on the Bluetooth headset. The volume

●

control of the transceiver does not function. However, if the audio is set to

output from the built-in speaker of the transceiver in the Bluetooth Speaker

setting, the volume level is controlled by the transceiver.

The microphone sensitivity can be set using the External Mic Sense function.

●

.

46