Sony SRW-5000 Maintenance Manual page 358
Hd digital
Hide thumbs
Also See for SRW-5000:
- Operation manual (202 pages) ,
- Installation manual (54 pages) ,
- Brochure & specs (12 pages)
Table of Contents
Check
3. Check the AT Head Height
(1) Play back the 1 kHz, 0 VU signal portion
(00:00 to 15:00) on the HR2-1A in the PLAY
mode.
(2) Slightly press down the portion A shown in
the figure, and check to see that the CUE
level decreases.
If the level increases, perform step 4-A of
next page.
(3) On the contrary, slightly push up the portion
B of the tape, and check to see that the CUE
level decreases.
If the level increases, perform the step 4-B.
6-28
. Alignment tape : HR2-1B (00:00 to 20:00)
TG-3 (Exit guide)
A
B
Spec. : The level decreases when the tape is moved
up and down.
AT Head Height Check
AT head
SRW-5000/5500
Table of Contents
