Sony SRW-5000 Installation Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. VCR
  5. SRW-5000
  6. Installation manual
Sony SRW-5000 Installation Manual

Sony SRW-5000 Installation Manual

Hd digital videocassette recorder
Hide thumbs Also See for SRW-5000:
Table of Contents

Quick Links

See also: Maintenance Manual, Operating Manual
HD DIGITAL VIDEOCASSETTE RECORDER
SRW-5000
SRW-5500
INSTALLATION MANUAL
1st Edition (Revised 3)
Serial No. 10101 and Higher: SRW-5000 (SY)
Serial No. 10001 and Higher: SRW-5500 (SY)
Table of Contents
loading

Related Manuals for Sony SRW-5000

Summary of Contents for Sony SRW-5000

  • Page 1 HD DIGITAL VIDEOCASSETTE RECORDER SRW-5000 SRW-5500 INSTALLATION MANUAL 1st Edition (Revised 3) Serial No. 10101 and Higher: SRW-5000 (SY) Serial No. 10001 and Higher: SRW-5500 (SY)
  • Page 2 Right, Left: 4 cm (1.6 inches) or more rack is within the specified limit of this product. Rear: 10 cm (4 inches) or more When using a Ethernet cable: For safety,do not connect to the connector for peripheral device wiring that might have excessive voltage. SRW-5000/5500...
  • Page 3 Gerät abschaltet und signalisiert “Batterie leer” oder nach längerer Gebrauchsdauer der Batterien “nicht mehr einwandfrei funktioniert”. Um sicherzugehen, kleben Sie die Batteriepole z.B. mit einem Klebestreifen ab oder geben Sie die Batterien einzeln in einen Plastikbeutel. 1 (P) SRW-5000/5500...

  • Page 5: Table Of Contents

    1-10-1. APR-62 Board ................1-15 1-10-2. CUE-13 Board ................1-16 1-11. System Setting ................... 1-17 1-11-1. Setting the System for SRW-5000 ........... 1-17 1-11-2. Setting the System for SRW-5500 ........... 1-20 1-11-3. Compatibility of REC and PB ..........1-23 1-11-4. Setting to Store Meta Data ............1-24 1-11-5.

  • Page 6: Manual Structure

    Related manuals Besides this “installation manual”, the following manuals are available for this unit. If these manuals are required, please contact your local Sony Sales Office/Service Center..Operation Manual (Supplied with this unit.) This manual is necessary for application and operation (and installation) of this unit.

  • Page 7: Installation

    Fix the unit securely to avoid drop when the unit is operat- ed at not-horizontal place. *Operation check If an error message appears on the time data display area, refer to the operation manual. (For more details, refer to the maintenance manual volume 1.) SRW-5000/5500...

  • Page 8: Power Supply

    AC inlet 1-4-2. Recommeded Power Cord This unit does not come with a power cord. To get a power cord, please contact your local Sony Sales Office/Service Center. For customers in the China: 1 Power cord 250 V 10 A (1.8 m):...

  • Page 9: Installation Space

    538.5 (Mass of this unit : approx. 30 kg) 45.5 577(Maximum traveling distance) 153.5 39.5 15.9 12.7 31.5 123.8 263.5 415.9 (38.5) 42.5 457.5 Unit : mm n Remove the feet when rack mounting. Dimensions when Rack-Mounting SRW-5000/5500...

  • Page 10: Rack Mounting

    . When installing the unit in an Outside Broadcasting van, be sure to fix the unit to the rack using the screws and . When mounting this unit into Sony LMS (Library ornamental washers supplied with the rack mount kit.
  • Page 11 PS4 x 20 B4 x 6 Inner rail Keep these screws, spacers and the feet. When operating the unit after demounting it from the rack, be sure to reattach the feet. Tightening torque: 98 x 10 N.m {10 kgf.cm} SRW-5000/5500...
  • Page 12 (PSW4 x 16) supplied with the rack mount kit. Ball retainer Tightening torque: 120 x 10 N.m {12.2 kgf.cm} B4 x 8 PSW4 x 16 Rack angle PSW4 x 16 Rack angle PSW4 x 16 SRW-5000/5500...
  • Page 13 50 to 55 mm Rack angle Rail bracket fixing screws B4 x 8 17. To fix the two outer rails to the rack, fully tighten the eight loosely fitted hexagon socket head cap screws in step 13 using the L-shaped hexagon wrench. SRW-5000/5500...
  • Page 14 21. While pressing each stopper of inner rails on both sides, slowly push the unit into the rack. Be careful not to catch your finger or hand in rack mount rail. Ornamental washer RK5 x 14 Stopper Ornamental RK5 x 14 washer Intermediate rail Stopper Inner rail SRW-5000/5500...

  • Page 15: Matching Connectors And Cables

    1-7. Matching Connectors and Cables When external cables are connected to the connector of this unit, the hardware listed below (or equiva- lents) must be used. Panel indication Matching connector (cable) Sony part No. Remarks TIME CODE IN XLR 3P, MALE 1-508-084-00...

  • Page 16: Signal Inputs And Outputs

    D-SUB 9P connector for a HD digital video controller (HKDV-900) connection 4 ETHERNET RJ-45 modular jack Complied with 10BASE-T/100BASE-TX 4 USB USB series B Complied with USB standard Ver 1.1 * : Refer to Optional “Interface manual” for details. 1-10 SRW-5000/5500...
  • Page 17 Applicable memory stick : 8 MB to 128 MB The memory card (PCMCIA type) can be used by removing the memory stick adaptor under the lower control panel. For removing the memory stick adaptor, refer to the maintenance manual volume 1. 1-11 SRW-5000/5500...
  • Page 18 EJECT OUT EJECT STATUS ETHERNET ETHERNET STATUS REEL HUB REEL HUB STATUS CURRENT SETUP DATA CHANGE CURRENT SETUP DATA CHANGE STATUS ALL REC INHIBIT ALL REC INHIBIT STATUS —— —— PLAY CLOSURE SW (PLAY) STOP CLOSURE SW (STOP) (Continue) 1-12 SRW-5000/5500...
  • Page 19 TXD ; Transmitted Data (Output) DTR ; Data Terminal Ready (Output) PRIORITY SG ; Signal Ground DSR ; Data Set Ready (Input) RM TX(+) RTS ; Request to Send (Output) RM RX(_) CTS ; Clear to Send (Input) 1-13 SRW-5000/5500...

  • Page 20: Switch Settings On Connector Panel

    . 75 Z termination switch of reference video input and IEEE 802.3 (10BASE-T) . 600 Z termination switch of CUE input External view Pin No. Signal TXD (+) TXD (_) RXD (+) — — RXD (_) — — 1-14 SRW-5000/5500...

  • Page 21: Switch Settings On Circuit Boards

    Output level (600 Z Z Z Z Z )/Output headroom S1200 S2200 S3200 +4 dBm/_20 dB _3 dBm/_18 dB +1 dBm/_18 dB S4200 0 dBm/_18 dB (Factory setting) S1300 S2300 0 dBm/_12 dB +4 dBm/_18 dB +4 dBm/_16 dB +6 dBm/_20 dB 0 dBm/_20 dB 1-15 SRW-5000/5500...

  • Page 22: Cue-13 Board

    Switches state (\ \ \ \ \ : Knob position) S100 (available in SRW-5500 only) +4 dBm/600 Z 0 dBm/600 Z _3 dBm/600 Z _20 dBm/600 Z (Factory setting) S101 +4 dBm/600 Z 0 dBm/600 Z _3 dBm/600 Z _20 dBm/600 Z (Factory setting) 1-16 SRW-5000/5500...

  • Page 23: System Setting

    1-11. System Setting 2. Setting the system Set the system referring to the table “1-11-3. Compatibility 1-11-1. Setting the System for SRW-5000 of REC and PB”. 1. Activating the system menu The selectable systems differ according to the VTR (1) Turn on the power.
  • Page 24 1080/59.94i 50Hz FRAME ACTIVE CANCEL EXEC EXIT DIAG [F7]ACTIVE LINE 1080 CNVERT LINE SYSTEM 59.94Hz [F8]CANCEL [F9]Exec of Reset VTR Sys SIGNAL (STOP & STANDBY OFF/EJECT) FRAME ACTIVE CANCEL EXEC EXIT DIAG CNVERT LINE F9 F10 F9 F10 1-18 SRW-5000/5500...
  • Page 25 1080 SYSTEM [F8]CANCEL [F9]Exec of Reset VTR Sys SIGNAL (STOP & STANDBY OFF/EJECT) FRAME ACTIVE CANCEL EXEC EXIT DIAG CNVERT LINE (3) Check that the system is restarted, and turn OFF the POWER switch and turn ON again. 1-19 SRW-5000/5500...

  • Page 26: Setting The System For Srw-5500

    [F3]SYSTEM FRAME 29.97Hz [F4]SYSTEM SIGNAL MODE 422 SYSTEM FRAME [F6]FRAME CONVERT 1080/59.94i [F7]ACTIVE LINE 1080 SYSTEM [F8]CANCEL [F9]Exec of Reset VTR Sys SIGNAL (STOP & STANDBY OFF/EJECT) FRAME ACTIVE CANCEL EXEC EXIT DIAG FORMAT CNVERT LINE F9 F10 1-20 SRW-5000/5500...
  • Page 27 [F4]SYSTEM REC FORMAT HDCAM-SR HDCAM-SR FRAME [F6]FRAME CONVERT --- N/A --- HDCAM [F7]ACTIVE LINE SYSTEM AUTO [F8]CANCEL [F9]Exec of Reset VTR Sys SIGNAL (STOP & STANDBY OFF/EJECT) FRAME ACTIVE CANCEL EXEC EXIT DIAG FORMAT CNVERT LINE F9 F10 1-21 SRW-5000/5500...
  • Page 28 SYSTEM [F8]CANCEL [F9]Exec of Reset VTR Sys SIGNAL (STOP & STANDBY OFF/EJECT) FRAME ACTIVE CANCEL EXEC EXIT DIAG FORMAT CNVERT LINE (3) Check that the system is restarted, and turn OFF the POWER switch and turn ON again. 1-22 SRW-5000/5500...

  • Page 29: Compatibility Of Rec And Pb

    720/50P, 59.94P: HDCAM-SR only It is common the case playback a HDCAM-SR formatted tape with 4:2:2/1080 video date while system setting is 4:2:2/1080. RGB 4:4:4: HDCAM-SR 1080 only Tapes with different sampling method cannot be played back (4:4:4/4:2:2). 1-23 SRW-5000/5500...

  • Page 30: Setting To Store Meta Data

    DOWN CONV. F9 F10 [ALT] [F9] EXIT DIAG SRW-5000 (1) Press the [F2] (HDCAM-SR) key, or [F4] (DOWN CONV.) key according to your system. [F2] (HDCAM-SR): The meta data line setting menu appears. Perform “3. Setting the meta data line”.
  • Page 31 [F2] [F2] [F2] (HDCAM-SR) on SRW-5000, In selecting [F2] [F2] 720 system or SRW-5500 Recording Records the line that is set by Meta Data 1 (720), Meta Data 3. Setting the meta data line 2 (720) or Meta Data 3 (720) as a non-compressed line.
  • Page 32 Section 1-11-5. (4) Press the [F10] (EXIT) key several times to return to the HOME menu. When playing back an HDCAM tape with meta data recorded, the meta data cannot be multiplexed with FC OUT. 1-26 SRW-5000/5500...
  • Page 33 Line 3 (HDCAM-SR). (3) Press the [F10] (EXIT) key several times to return to the OTHERS CHECK menu. When setting input/ output phases continuously, proceed to Section 1-11-5. (4) Turn OFF the POWER switch and turn ON again. 1-27 SRW-5000/5500...

  • Page 34: Input/Output Phase Settings

    OFF: Outputs in the same phase as reference signal. _90H: Outputs 90H (HD) ahead of reference signal. The phase setting procedure of SRW-5500 is the same as that of SRW-5000. OTHERS CHECK NVRAM 1. Activating the phase set menu PHASE SETTING...
  • Page 35 : +1FRAME AES/EBU & AES/EBU & ANALOG OUTPUT : LINE AU PB ANALOG OUTPUT : LINE AU PB LTC OUTPUT : LINE LTC OUTPUT : LINE AUDIO AES/AN EXIT AUDIO AES/AN EXIT DIAG INPUT INPUT DIAG INPUT INPUT 1-29 SRW-5000/5500...

  • Page 36: Storing And Reading System Settings In/From System Bank

    [F10] (EXIT) key. the following. NO OPERATION: Changed data is not saved. . SYSTEM menu: Section 1-11-1 (SRW-5000) ALL DATA PREVIOUS: To return the data to the Section 1-11-2 (SRW-5500) previous data. . META DATA SETUP menu: RESET ALL DATA:...
  • Page 37 (5) Press the [F10] (EXIT) key several times to return to the HOME menu. CURRENT SYSTEM SYSTEM BANK 1 (Preset) 1 (Preset) 2 (Preset) 3 (Preset) 4 (Preset) 5 (Preset) 6 (Preset) 7 (Preset) 8 (Preset) F (Preset) DATA DETAIL EDIT DIREC- COPY EXIT DIAG TITLE TION 1-31 SRW-5000/5500...

  • Page 38: Storing/Reading System Settings In/From Memory Stick

    After the unit restarts, the title of the read bank number appears at the left item [C]. If the system settings are updated after reading, the title displayed at [C] remains unchanged. (5) Press the [F10] (EXIT) key several times to return to the HOME menu. 1-32 SRW-5000/5500...
  • Page 39 C (Preset) (Preset) 1 (Preset) (Preset) 2 (Preset) (Preset) 3 (Preset) (Preset) 4 (Preset) (Preset) 5 (Preset) (Preset) 6 (Preset) (Preset) 7 (Preset) (Preset) 8 (Preset) DATA F (Preset) DETAIL EDIT SELECT DIREC- COPY EXIT DIAG TITLE TION 1-33 SRW-5000/5500...
  • Page 40 (Memory Stick side), and position the blinking cursor bar at the bank number of the save destination (system bank of Memory Stick) using the [(]/[)] keys. (5) Press the [F9] (COPY) key. A confirmation message appears. 1-34 SRW-5000/5500...

  • Page 41: Editing Titles Of The System Bank

    (7) Press the [F10] (EXIT) key several times to return to (4) Type characters. the HOME menu. For typing characters, refer to 4-1-6 of the operation manual. (5) Press the [F10] (SAVE/EXIT) key. The entered title is fixed. 1-35 SRW-5000/5500...

  • Page 42: Checking Saved System Bank Data In Detail

    The data saved in a Memory Stick on the unit is also The data stored in the system bank is the settings of the available for other SRW-5000/5500. SYSTEM menu, META DATA SETUP menu, and However, the data cannot be loaded to the current settings PHASE SET menu.

  • Page 43: Opening/Closing The Lower Control Panel

    2. After pressing the unlock buttons, open the lower control panel in the arrow direction. The inclination of the lower control panel can be adjusted to five steps (about 18d each time) between vertical and horizontal. Unlock button Unlock button Lower control panel 1-37 SRW-5000/5500...

  • Page 44: Reference System

    In the PB mode, when no reference signal is input to REF. INPUT 1 connector or when no reference video signal (REF. INPUT 1) is input. Table 1-13-1. Reference System ITEM-005 setting external auto input Operation mode PB/EDIT/REC EDIT PB/EDIT/REC Selected reference signal REF. INPUT 1 HD SDI INPUT A 1-38 SRW-5000/5500...

  • Page 45: Settings When Editor Is Connected

    Set the VTR constant values according to the table 1-14-2 below when the editor which needs the setting of VTR constant values is connected. Table 1-14-2. VTR Constant Values Settings of Editor (Standard Value/Hexadecimal) SRW-5000 VTR CONSTANT 1 VTR CONSTANT 2 Data No.

  • Page 46: Removing/Reattaching Plug-In Board

    Upper lid (front) assembly 6. Open the eject levers on both ends of the board in the Knob Fixing screw direction of the arrows. 7. Hold the eject levers and slowly pull the board out. Pulling out Insertion Removal Installation 1-40 SRW-5000/5500...

  • Page 47: Taking Out The Cassette In Tape Slacking

    2. Slide the knobs on upper lid (front) assembly each in the inside. (Move the knobs to the outside to fix the upper lid (front) assembly.) 3. Remove the upper lid (front) assembly in the arrow direction. Knob Upper lid (front) assembly Knob Fixing screw Removal Installation 1-41 SRW-5000/5500...
  • Page 48 8. Pull the ME wire for a few times with short steps in the arrow direction on the EJECT label to take up the tape inside the cassette. AE-31 board Board holder M gear EJECT EJECT label label ME wire Wire holder Gear box assembly 1-42 SRW-5000/5500...

  • Page 49: Appendix A Setting Check Sheet

    Write down the value of hours meter when checking, servicing, and maintaining. ITEM Date Hours meter H01: OPERATION HOURS H02: DRUM RUNNING HOURS H03: TAPE RUNNING HOURS H04: THREADING COUNTER H12: DRUM RUNNING HOURS (Resettable) H13: TAPE RUNNING HOURS (Resettable) H14: THREADING COUNTER (Resettable) SRW-5000/5500...
  • Page 50 +4 dBm/_16 dB only 6-bit to ON S4200 0 dBm/_20 dB +6 dBm/_16 dB only 8-bit to ON +4 dBm/_20 dB dBm/ Monitor output level/ S1300 output headroom +4 dBm/_20 dB dBm/ S2300 +4 dBm/_20 dB dBm/ (Continued) SRW-5000/5500...
  • Page 51 Factory setting Board Switch No. Factory setting APR-62 S400 HPR-8 S600 (SRW-5500 only) S701 S2000 S6100 IRC-5 S400 (Board No. suffix -14) CP-382 S700 SS-95 S100 S300 S101 EQ-94 S2201 S500 S2901 S501 HIF-8 S900 S600 (Continued) S802 (Continued) SRW-5000/5500...
  • Page 52 Setting Check Sheet Board Switch No. Factory setting VPR-79 S100 S700 SRW-5000/5500...
  • Page 53 The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation.
  • Page 54 SRW-5000 (SY) Printed in Japan Sony Corporation SRW-5500 (SY) E 2005. 7 08 3-791-086-04 ©2003...

This manual is also suitable for:

Srw-5500

Table of Contents