Table of Contents
2.23
Leak in the foam
The leakage diagnosis always requires the following measures.
►
If appliance is built in – remove appliance.
►
Look for oil on all solder joints and connection points.
A leak in the foam can only be coded if there is no trace of oil on any
connection.
Examples of oil leaks:
173_58300000002379_ara_en_j.doc – 29.04.14
2.24
Removing adhesive residue
Internal tests have shown that adhesive residue is best removed with
commercially available glass cleaner (Sidolin) or methylated spirits.
These two cleaning agents may also be used without concern and are
available everywhere in the trade.
Seite 36 von 41
Hide quick links:
Table of Contents
