Page 1
Additional information HD COLOR CAMERA SYSTEM REMOTE CONTROL UNIT RU-1500JY OPERATING INSTRUCTIONS Please read this operating instruction carefully for proper operation, and keep it for future reference. Note: The model and serial numbers of your product are important for you to keep for your convenience and protection.
Procedure for Ethernet connection Connection Diagram The power of RU-1500 is supplied thorough the control cable. Therefore the control cable should be connected to the CCU even on Ethernet connection. The power cable(C-101ET) services the power of XLR4pin. (NOTE) The version for CCU supporting Ethernet connection is CU-HD1000: V 2.00 or later TU-HD1000: V 1.00 or later Power cable(C-101ET)
LCD menu 5.4.6 ETHERNET menu (CONFIG) & description. Item Setting RU-1500 Description Initialize ETHERNET ON/OFF OFF OFF:Remote control mode ON:ETHERNETmode Move to local address setting LOCAL ADDRESS menu Move to a menu that an REMOTE SELECT address setting of the connected CCU.
Page 4
LCD menu 5.4.6 (4) ETHERNET(LOCAL.Netmask) menu (CONFIG) & description. Set the local Netmask by the Rotary encoder 1 to 4. Item Setting RU-1500 Description Initialize Store the new setting, and then move to previous page. Cancel the new setting, and CANCEL then move to previous page.
Page 5
LCD menu 5.4.6 (7) ETHERNET(REMOTE.IP ADDRESS.CONNECT) menu (CONFIG) & description. A disconnection message will be displayed to press the CONNECT button at CONNECT ON. YES: Disconnected from the network. NO: Connecting to the network is continued. A connection message will be displayed to press the CONNECT button at CONNECT OFF.
Page 6
LCD menu 5.4.6 (8) ETHERNET(REMOTE.IP ADDRESS.CONFIG) menu (CONFIG) & description. Set the IP address to connect by Rotary encoder 1 to 4. Item Setting RU-1500 Description Initialize Store the new setting, and then move to previous page. Cancel the new setting, and CANCEL then move to previous page.