NCR Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for an NCR biop-
tic scanner auxiliary port configuration. The following prefixes are programmed
for each symbology:
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
Wincor Nixdorf Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nix-
dorf terminal. This bar code sets the baud rate to 9600 bps and the data format
to 8 data bits, no parity, 1 stop bit.
Wincor Nixdorf Beetle™
Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nix-
dorf Beetle terminal. The following prefixes are programmed for each symbol-
ogy:
Symbology
Code 128
Code 93
Codabar
UPC-A
UPC-E
EAN-8
2 - 8
Prefix
A
E0
FF
F
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings
Prefix
K
L
N
A0
C
B
Symbology
Code 39
Interleaved 2 of 5
All other bar
codes
Symbology
EAN-13
GS1-128
Interleaved 2 of 5
Plessey
Straight 2 of 5 IATA
All other bar codes
Prefix
B1
B2
B3
Prefix
A
P
I
O
H
M