1. Manuals
  2. Brands
  3. Pioneer Eclipse Manuals
  4. Floor Machine
  5. PE-200BU
  6. Operator's manual

Pioneer Eclipse PE-200BU Operator's Manual

Amano pioneer eclipse high speed burnisher
Hide thumbs
Table of Contents

Quick Links

Your new High Speed Burnisher will afford you many years of trouble-free operating satisfaction
provided it is given proper care. Prior to packaging, your High Speed Burnisher was inspected by a
Quality Control Technician.
WARNINGS
READ THIS OPERATORS MANUAL!
WARNING: You must have training in the operation of this machine before using.
WARNING: Machines can burn flammable materials and vapors. Do not use this machine with or near fuels, grain
dust, solvents, thinners or other flammable materials.
WARNING: Do not operate this machine unless it is completely assembled.
WARNING: Do not use this machine as a step or to move furniture.
WARNING: When disconnecting power cord from electrical outlet, grasp the plug. Pulling it out by the cord itself can
damage cord insulation and internal connection to plug. To prevent electric shock, always remove the
electrical plug from the electrical outlet before doing any repairs or maintenance to this machine.
WARNING: To prevent injury, always remove the electrical plug from the electrical outlet before changing the polishing
pad and before leaving the machine.
WARNING: To prevent injury, keep hands, feet and loose clothing away from the rotating pad.
WARNING: Maintenance and repairs must be done by authorized personnel only.
WARNING: Keep all fasteners tight. Keep adjustments according to specifications.
WARNING: Keep the electrical parts of the machine dry. For storage, keep the machine in a building.
WARNING: Always use a three-wire electrical system connected to the electrical ground. For maximum protection
against electric shock, use a circuit that is protected by a ground fault circuit interrupter. Consult with your
electrical contractor.
WARNING: To prevent damage to the power cord, do not let the pad, pad driver or wheels touch the power cord when
the machine is running. Always lift the power cord over the machine.
WARNING: Make sure all labels, decal's, warnings, cautions and instructions are fastened to the machine.
Your Authorized Amano Pioneer Eclipse Distributor
Authorized Amano Pioneer Eclipse Distributor Telephone Number
Amano Pioneer Eclipse: 1-336-372-8080
Table of Contents
loading

Related Manuals for Pioneer Eclipse PE-200BU

Summary of Contents for Pioneer Eclipse PE-200BU

  • Page 1 Always lift the power cord over the machine. WARNING: Make sure all labels, decal’s, warnings, cautions and instructions are fastened to the machine. Your Authorized Amano Pioneer Eclipse Distributor Authorized Amano Pioneer Eclipse Distributor Telephone Number Amano Pioneer Eclipse: 1-336-372-8080...

  • Page 2: Safety Instructions

    The PE-200BU is provided with an attachment cap plug, as shown in Sketch A, and is intended for use on a nominal 120 volt circuit. If a properly grounded receptacle, as shown in Sketch A, is unavailable, an adapter, as shown in Sketch C, is available and should be installed, as shown in Sketch B, if the outlet box that houses the receptacle is grounded.
  • Page 3 Instructions Application The PE-200BU High Speed Burnisher is used to achieve and/or maintain a high gloss appearance on an established floor finish. The high pad revolution of the floor burnisher combined with a good polishing pad will turn properly established cleaned floor finish into a high gloss, hardened finish known as the “wet look shine”. The pads recommended are the image beige or white synthetic pads or the natural hogs hair blended pads.

  • Page 4: How To Operate The Machine

    NOTE: The hardened steel cam release lever does not require extreme tightening to effectively hold the handle in position. Over-tightening will shorten the functional life of the lever. (Fig 3) How to Operate the Machine Plug the machine in as directed and lower the handle to the desired operating height. Push the safety switch forward (Fig 4) and squeeze the switch triggers beneath the handle grips.

  • Page 5: Maintenance

    Transporting Use the rear wheels for transporting the PE-200BU. This will insure that the operating wheels remain clean and smooth for use on clean floor surfaces. (Fig 5) Maintenance Once a month, remove the motor cover of the unplugged PE-200BU by removing the motor cover screws.

  • Page 6: Drive Belt Adjustment

    Do not operate with handle set too high. Recommended handle height is from your waist with your arms extended forward. Prevent circuit overload. Do not spray buff with the PE-200BU. Apply a restorer, such as Power-Flite’s Escalate, allow to dry, then burnish. Check pad and change if dirty or rough.
  • Page 7 Base Housing and Handle...

  • Page 8: Base Housing

    Screw, SHCS, 1/4-20 X8227 Bolt 5/16-18 x 1 1/4 Hex Tap, Full Thread, Zinc 58 X9401 Washer, Flat, Brass, 1/4” X9274 Left Handle Bracket PE-200BU 59 X9299 Pad Cover 20” Metal Burnisher w/ Bumper X9049 Motor Screen, 2 Speed, Classic X9050...

  • Page 9: Wiring Diagram

    Wiring Diagram...

  • Page 12: Limited Warranty

    THE OBLIGATION OF PIONEER ECLIPSE CORPORATION 1) The obligation of Amano Pioneer Eclipse under this warranty is limited to repairing or replacing, at its option, any part which is proven to be defective in material or workmanship under normal use for the applicable period stated above.

Table of Contents