Related Manuals for Pioneer Eclipse SwingStar SS1715V
Summary of Contents for Pioneer Eclipse SwingStar SS1715V
- Page 1 Operator’s Manual ® Floor Machines SS1715V 17” SwingStar 1.5hp motor, 175 rpm SS2015V 20” SwingStar 1.5hp motor, 175 rpm SS2015DV 20” SwingStar 1.5hp motor, 175/320 rpm...
-
Page 2: Limited Warranty
THE OBLIGATION OF PIONEER ECLIPSE CORPORATION 1) The obligation of Pioneer Eclipse under this warranty is limited to repairing or replacing, at its option, any part which is proven to be defective in material or workmanship under normal use for the applicable period stated above. -
Page 3: Important Safeguards
Your new Pioneer Eclipse Floor Machine will afford you many years of trouble-free operating satisfaction provided it is given proper care. Prior to packaging, your Pioneer Eclipse Floor Machine was inspected by a Quality Control Technician. Uncrating WARNING: Keep all fasteners tight. Keep adjustments according to specifications. -
Page 4: Machine Preparation
3. Turn the drive block, brush or attachment counter- The Pioneer Eclipse dual speed machines will operate in a clockwise as far as it will go until it is seated in the broad range of applications. These machines perform all ready-to-use position. -
Page 5: Machine Maintenance
Machine Maintenance Safety Instructions Once a month remove the motor cover and vacuum out This Floor Machine should be grounded while in use to any dust or debris which has accumulated on the motor. protect the operator from electric shock. Replace the motor cover by setting it over the holes in the This machine is equipped with a 3-conductor cord and a 3- housing and replace all of the screws. - Page 7 READ ALL INSTRUCTIONS, WARNINGS AND CAUTIONS BEFORE USING EQUIPMENT. These guidelines are presented for your protection and convenience. Please read them carefully, since a failure to heed these precautions could result in discomfort or injury. When using an electrical appliance, basic safety precautions should always be followed.
- Page 9 Part Number Description M1369GS 14/3 stwa, 50' gray cord with strain relief SR36 strain relief washer X8008N nut, lock, 1/2" steel conduit X8012 clamp, collor, handle X8013 cord hook, plated X8207 screw, 10-24 x 1/2", phph, type "f" X8012A handle tube clamp lever assembly (excludes clamp collar) X8016 knob, plastic, handle release X8807R...
- Page 11 Part Number Description SR37 strain relief, metal X8100 counter nut X8228 spacer SR37A brass sleeve strain relief X8011B handle tube, 1-1/2" w/bushings X8012A handle clamp assy X8013 cord hook X8210 wheel screw X8027L left brace X8027R right brace X8018 pivot shaft X8029 axle X8025...
- Page 12 © 2004 Amano Pioneer Eclipse Corporation P.O. Box 909 Sparta, NC 28675 1-800-367-3550; 1-336-372-8080 Fax: 1-336-372-2895 www.pioneer-eclipse.com LT043900, 9/04...