Setting The Frequency - Panasonic VF0 Series 400V class Instruction Manual

400v class compact inverter

Table of Contents

Setting the frequency and forward/reverse run operation with the

operation panel

There are two methods for setting the frequency and carrying out forward/

reverse run operation with the operation panel.

· Frequency setting:

· Forward/reverse run operation: "Forward run/reverse run method",

1. Setting the frequency

1) Potentiometer setting method (Parameter P09 set to "0": Factory setting)

Set with the rotation angle of the frequency setting dial on the panel. The

operation will stop at the Min. position (0V stop: refer to page 73), and

the maximum frequency will be attained at the Max. position.

2) Digital setting method (Parameter P09 set to "1")

Press the MODE button on the panel to enter the frequency setting mode

(Fr). Press the SET button, set the frequency to be set with the

button and

data.

The frequency can be changed by holding down the

(down) button during operation. (Hereafter, this function is called the

MOP function.)

This MOP function cannot be used when parameter P08 is set to "1".

(down) button, and then press the SET button to enter the

"Potentiometer setting method",

"Digital setting method"

"Start/ stop, rotation direction mode

setting method"

(up)

(up) button and

Table of Contents