Table of Contents
12) Touch Panel test
(1) Enter "11-ENTER" through the keyboard.
***** TEST # 11 Touch Panel Test. *****
12-1)Touch panel calibration
(1) Enter "1-ENTER" through the keyboard to perform the calibration test.
+
+
+
(2) Touch the center of each + mark (9 points) to perform calibration.
(The + mark disappears from the screen when it is touched.)
If it is necessary to stop the testing work as a result of touching a wrong point by mistake during calibration, touch all
the nine points to withdraw from the calibration screen. Since then, restart the test from the step of (2) above.
(3) Upon normal completion of calibration, the following screen display is presented:
***** TEST # 11 Touch Panel Test. ****
CALIBRATION
Test done. Press any key.
If "CALIBRATION NG" is displayed, restart the test from the step of (2) above.
(4) Press any key to recover the screen of [***** TEST #11 Touch Panel Test.*****].
LCD DISPLAY
0 : Return to MAIN MANU.
1 : CALIBRATION.
2 : TOUCH TEST.
Select and press ENTER key : 0
LCD DISPLAY
+
+
+
LCD DISPLAY
OK
3-29
0
1
2
ENTER
+
+
+
Hide quick links:
Table of Contents
