Panasonic CY-VHD9401N Operating Instructions Manual page 25
Overhead 9" widescreen color lcd monitor with built-in dvd player
Hide thumbs
Also See for CY-VHD9401N:
- Installation instructions manual (41 pages) ,
- Installation instructions manual (14 pages)
Table of Contents
Troubleshooting
E
N
G
L
DVD video/Video CD/CD/MP3
I
S
H
Problem
Possible cause
35
No playback
The disc is inserted upside down.
There is a fl aw or foreign objects
on the disc.
The disc has unplayable formatted
data.
The unit plays back the ROM track
of a mix mode CD.
A disc that cannot be played back
on this unit is inserted.
The CD-R/RWs that
The playability of some CD-R/RWs
are playable on
may depend on the combination
other devices are not
of media, recording software
playable on this unit.
and recorder to be used even if
these CD-R/RWs are playable on
other devices such as a personal
computer.
Sound skipping or
There is a fl aw or foreign objects
noise
on the disc.
Sound skipping due to
The unit is not suffi ciently secured. Mount the unit securely with the
vibration
Disc unejectable
Something such as a peeled label
prevents the disc from coming out.
The microcontroller in the unit
operates abnormally due to noise
or other factors.
The buttons do not
Some operations are not permitted
work.
with certain discs.
132
CY-VHD9401N
(continued)
Possible solution (reference page)
Insert a disc correctly. (page 110)
Remove the foreign objects, or use a
fl awless disc. (page 137)
Refer to "Notes on MP3". (page 116)
Skip the ROM track.
This unit can only play the following
types of discs: DVD video, Video CD,
CD, CD-DA data recorded CD-R or
CD-RW, and MP3 data recorded CD
media (CD-ROM, CD-R, CD-RW).
Make CD-R/RWs in different
combination of media, recording
software and recorder after referring to
the description about MP3. (page 116)
Remove the foreign objects, or use a
fl awless disc. (page 137)
For MP3, refer to "Notes on MP3".
(page 116)
mounting parts, referring to the
installation instructions.
Press and hold [<] (Eject) for more
than 10 seconds. If failure persists,
press the reset switch. (page 136)
If normal operation is not restored,
call the store where you purchased the
unit or the nearest Panasonic Service
Centre.
Unplug the power cord and plug it
again. In case the unit is still out of
order, consult the dealer.
Refer to the guide provided with your
disc.
DVD video
Problem
Possible cause
Cannot switch
It is not possible to switch if
the audio
the disc does not have multiple
language/subtitle
audio languages/subtitle
language/angle.
languages/angles recorded on it.
Some discs permit switching
through a menu screen.
Sometimes, switching angles is
possible only with certain scenes.
The picture does
Cables are not correctly connected. Connect cables correctly.
not appear on the
VTR1/2 input video setting is
monitor.
wrong.
It is diffi cult to hear
D.Range Compression is set to
quiet sound (Dolby
"OFF" or "Standard".
digital DVD software
only)
A DVD-R or DVD-RW
A Disc in the video recording (VR)
is not playable.
format is unplayable.
The disc is still unfi nalized.
CD
Problem
Possible cause
CD-text is not
Disc is dirty, or has scratches.
displayed normally.
E
N
G
L
I
S
H
Possible solution (reference page)
36
Refer to the guide provided with your
disc.
Set VTR1/2 input video setting is
correctly. (page 122)
Set "D.Range Compression" to
"Minimum". (page 126)
Insert a disc with video formatted disc.
(page 13)
Finalize the disc.
Refer to "Discs that can be Played
Back" (page 13) or "Notes on
CD-Rs/RWs, DVD-Rs/RWs" (page 137)
for other cases.
Possible solution (reference page)
Clean the disc, referring to the section
on "Notes on Discs". (page 137)
133
CY-VHD9401N
Table of Contents
