Table of Contents
PhotoPC 3100Z
5.4 Adjustment
5.4.1 Initial Operation
This section explains the initial operation required before the adjustment. Unlike
EPSON previous models, the various settings will not be cleared by initialization for
PhotoPC 3100Z. Initialization only clears the memory (image storage field).
C A U T I O N
Perform initialization before uploading the firmware. If you upload
the firmware when the memory is full of data (taken images), error
may be indicated.
1.
Complete set-up before the adjustment. (See 5.3 Preparation for Adjustment.)
2.
Press the initialize button on the program. The confirmation screen will appear.
Figure 5-3. Program Screen When Initial Operation is Selected.
3.
Select "Y" and perform initialization.
Adjustment
4.
mark on the camera, which indicates the resolution selection, moves for 20
seconds. (This period may vary according to the image data size currently stored.
The timing that the
mark on the camera starts moving lags behind the timing
that the program indicates its completion. When the program indicates it is
completed, you can take off AC cable and USB communication cable.)
5.
Click OK on the screen.
Figure 5-4. Program Screen When Initialization is Completed.
Adjustment
Revision B
82
Table of Contents
Troubleshooting
