Table of Contents
PhotoPC 3100Z
4.3.3 Installing the CABINET TOP
1.
Install the ST1 board (1) to the CABINET TOP and secure it with 1 screw (2)
(2.0x5).
2.
Connect the pin to ST1 board.
C H E C K
Hold the pin when soldering the pin so that the pin does
P O I N T
not get off. (See Figure 4-11.)
When soldering the pin, be sure that the soldering part
is shorter than the length of pin. (See Figure 4-11.)
3.
Secure the CABINET TOP to the CABINET FRONT with 3 screws (3) (1.7x5).
Disassembly and Assembly
Figure 4-11. Installing the CABINET TOP
Assembly
Revision A
pin
Solder the pin within the length of the pin.
73
Table of Contents
Troubleshooting
