AutoDome Easy
10
Program and Operation
The AutoDome Easy is programmed through the on-screen display (OSD) menus. Each on-
screen display (OSD) shows a list of parameters or submenus that can be selected by the
operator.
10.1
Menu Navigation
To access the OSD menus, open the Main menu by pressing ON + 4 + 6 + ENTER.
NOTICE! The main menu can not be accessed when an auto pan or preset tour is running.
i
Press the joystick in any direction to stop the tour or auto pan.
Use the joystick to navigate through the menu. To navigate throughout the OSD menus, do the
following:
10.2
Main Menu
The Main menu provides access to all programmable AutoDome Easy settings. Press ON + 4 +
6 + ENTER to display the Main menu.
Menu
Preset
Tour
Auto Pan
Sector
Alarm
Camera Setup
Dome Setup
Exit
Bosch Security Systems, Inc.
•
To scroll through the parameters, move the joystick up
•
To edit the parameters or enter a submenu, move the joystick left
•
To exit the submenu, move the cursor to EXIT, then move the joystick to the right
.
MAIN MENU
PRESET
TOUR
AUTO PAN
SECTOR
ALARM
CAMERA SETUP
DOME SETUP
EXIT
Description
Pre-selects and stores combinations of pan, tilt and zoom positions which allow a
set view to be recalled. Also known as preset shot.
Accesses a sequence of preset shots combined to provide a pre-programmed tour
of the area covered by an AutoDome Easy camera.
Accesses a range of 1-4 for customized auto pan tours.
Breaks the total 360 degrees into eight sectors of 45 degrees each. Individual titles
may be assigned to each sector.
Accesses the alarm settings such as: input type, timeout options, and dwell time.
Accesses adjustable camera settings such as: white balance, gain, sharpness, sync,
backlight, and shutter.
Controls miscellaneous dome operations such as: OSD, auto pivot, home function,
and initialization (reset to factory defaults).
Exits the menu without saving the data.
Installation and Configuration Manual
Program and Operation
and down
.
and right
December 06, 2006 | F01U074570 | 3.0
15
.