Table of Contents
Web server
You can also configure the web server ports from which access to the management tool is
permitted.
Secure web server port: Specify a port number for the controller to use to provide
secure HTTPS access to the management tool. Default is 443. Before reaching the
management tool login page, you must accept a security certificate. The default
certificate provided with the AP will trigger a warning message on most browsers
because it is self-signed. To remove this warning message you must replace the default
certificate. See
About certificate warnings on page
Web server port: Specify a port number for the AP to use to provide standard HTTP
access to the management tool. These connections are met with a warning, and the
browser is redirected to the secure web server port. Default is 80.
Auto-refresh
This option controls how often the AP updates the information in group boxes that show the
auto-refresh icon in their title bar. Under Interval, specify the number of seconds between
refreshes.
Web inactivity logout
When this option is enabled, a manager will automatically be logged out if their session is idle
for the specified number of minutes.
SNMP
The AP provides a robust SNMP implementation supporting both industry-standard and
custom MIBs. For information on supported MIBs, see the MSM SNMP MIB Reference Guide.
The AP supports SNMP v1/v2c/v3 and both MIB II and HP-specific MIB attributes via the HP
Enterprise MIB.
6-17.
Auto-refresh icon
Management
SNMP
2-7
- Quick Links:
- Wireless Configuration
- Network Configuration
Hide quick links:
Chapters
Table of Contents
