Table of Contents
6.3.4
Installing SSD 0
Ê Remove the mezzanine carrier as described in section
mezzanine cards" on page
Ê Choose the desired mounting frame (PCH or SAS) for SSD 0.
Figure 17: Securing the drive
Ê Shift the drive into the connector on the mounting frame (1).
Ê Secure the drive with 4 screws (see arrows). Torque: 0.6 Nm (not applicable
for the Japanese market)
BX924 S3
148.
Upgrade and Maintenance Manual
Solid state drives
"Removing
109
Table of Contents
