Fujitsu SPARC Enterprise M4000 Reference Manual page 32
Xscf control package (xcp) 106x
Hide thumbs
Also See for SPARC Enterprise M4000:
- User manual (376 pages) ,
- Service manual (308 pages) ,
- Features manual (148 pages)
Table of Contents
addboard(8)
OPERANDS
EXTENDED
DESCRIPTION
10
Forcibly incorporates into a domain an XSB.
-f
Note – If the -f option is used to forcibly add a system board to
a domain, all the added hardware resources may not work
normally. For this reason, use of the -f option is not
recommended in normal operation. If the -f option must be
specified, verify the status of every added system board and
device.
Displays usage statement. When used with other options or
-h
operands, an error occurs.
Automatically answers 'n' (no) to all prompts.
-n
Suppresses all messages to stdout, including prompts.
-q
Displays a detailed message. If this option is specified with the
-v
-q option, the -v option is ignored.
Automatically answers 'y' (yes) to all prompts.
-y
The following operand is supported:
xsb
Specifies the XSB number to be configured or assigned. Multiple
xsb operands are permitted, separated by spaces. The following
xsb form is accepted:
x–y
where:
x
y
When the command is executed, a prompt to confirm execution of the command
■
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
If "-c configure" is specified when either the domain power has been turned
■
off or the operating system is not running, an error occurs.
When "-c configure" is specified, hardware diagnosis is performed on the
■
system board before it is incorporated into the domain. Therefore, command
execution may take time.
To use the addboard(8) command to configure or assign a system board, DCL
■
must be set up in advance using the setdcl(8) command.
If the addboard(8) command is executed under the progress of power-on or
■
power-off processing, the busy status is returned. After that processing in the
domain is completed, reexecute the command.
XSCF Reference Manual • Last Revised January 2007
An integer from 00–15.
An integer from 0–3.
Table of Contents
