Fujitsu SPARC Enterprise M4000 Reference Manual page 319

Xscf control package (xcp) 106x
Hide thumbs Also See for SPARC Enterprise M4000:
Table of Contents
NAME
showdualpowerfeed - display the current setting of dual power feed mode
SYNOPSIS
showdualpowerfeed
showdualpowerfeed -h
DESCRIPTION
The showdualpowerfeed(8) command displays the current setting of dual power
feed mode in the system.
The showdualpowerfeed(8) command is valid in a midrange server only.
The dual power feed mode can be set by the setdualpowerfeed(8) command.
Also, before the dual power feed mode is changed by the setdualpowerfeed(8)
command, the values of changed settings are displayed.
You must have platadm or fieldeng privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS
The following options are supported:
-h
EXAMPLES
EXAMPLE 1
EXAMPLE 2
EXIT STATUS
The following exit values are returned:
0
>0
SEE ALSO
setdualpowerfeed(8)
Displays usage statement.
Displays the current setting of dual power feed mode in the system.
showdualpowerfeed
XSCF>
Dual power feed is enabled.
Changes the dual power feed mode with the setdualpowerfeed(8) com-
mand and then displays the current state.
showdualpowerfeed
XSCF>
enable -> disable
NOTE: Dual power feed will be disabled the next time the platform is
powered on.
Successful completion.
An error occurred.
System Administration
showdualpowerfeed(8)
373
Table of Contents
loading

Table of Contents