Fujitsu SPARC Enterprise M4000 Reference Manual page 129
Xscf control package (xcp) 106x
Hide thumbs
Also See for SPARC Enterprise M4000:
- User manual (376 pages) ,
- Service manual (308 pages) ,
- Features manual (148 pages)
Table of Contents
NAME
rebootxscf - reset the XSCF
SYNOPSIS
rebootxscf [ [-q] -{y|n}]
rebootxscf -h
DESCRIPTION
The rebootxscf(8) command resets the XSCF.
In case the XSCF unit is duplicated configuration, both of the active XSCF and the
standby XSCF will be reset.
You must have platadm or fieldeng privilege to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS
The following options are supported:
-h
-n
-q
-y
EXTENDED
When you cancel the XSCF reset using the setdate(8) which commands reset
DESCRIPTION
XSCF automatically, even if you perform this command, the information that is set
is not applied in XSCF.
EXAMPLES
EXAMPLE 1
EXAMPLE 2
EXAMPLE 3
EXAMPLE 4
Displays usage statement. When used with other options or
operands, an error occurs.
Automatically answers 'n' (no) to all prompts.
Suppresses all messages to stdout, including prompts.
Automatically answers 'y' (yes) to all prompts.
Resets the XSCF.
rebootxscf
XSCF>
The XSCF will be reset. Continue? [y|n]:
Resets the XSCF.
rebootxscf -y
XSCF>
The XSCF will be reset. Continue? [y|n]:
Resets the XSCF. Automatically replies with 'y' without displaying the
prompt.
rebootxscf -q -y
XSCF>
Cancels the rebootxscf(8) command execution that is in progress.
rebootxscf
XSCF>
The XSCF will be reset. Continue? [y|n]:
XSCF>
System Administration
y
Automatically replies with '
y
n
rebootxscf(8)
' to the prompt
.
y
127
Table of Contents
