5
Configuring Ethernet Connection Blade
Module
This section contains information about Ethernet Connection Blade Module unpacking, installation, and
cable connections.
5.1
Overview
The Ethernet Connection Blade Module is inserted in the PRIMERGY BX900 Blade Server which is a
modular server system that can integrates up to 18 processor blades and eight Ethernet Connection
Blade Modules or in the PRIMERGY BX400 Blade Server which is a modular server system that can
integrates up to 8 processor blades and four Ethernet Connection Blade Modules.
Unpacking the Ethernet Connection Blade Module
To unpack the Ethernet Connection Blade Module:
Before unpacking the Ethernet Connection Blade Module, inspect the package and report
!
any evidence of damage immediately.
An ESD strap is not provided, however, it is recommended to wear one for the following procedure.
1. Open the container.
2. Carefully remove the Ethernet Connection Blade Module from the container and place it on a
secure and clean surface.
3. Remove all packing material.
4. Inspect the Ethernet Connection Blade Module for damage. Report any damage immediately.
The illustrations in this document might differ slightly from actual Ethernet Connection Blade
!
and Chassis.
2011 Fujitsu Technology Solutions
©
48