Cli Mode-Based Topology - Fujitsu PRIMERGY BX900 User Manual
Blade server systems ethernet connection blade module sb6 / sb11a / sb11 switch version
Hide thumbs
Also See for PRIMERGY BX900:
- System message manual (430 pages) ,
- User manual (96 pages) ,
- Hardware reference manual (69 pages)
Table of Contents
10.2
CLI Mode-based Topology
Parameters
Parameters are order dependent.
The text in bold italics should be replaced with a name or number. To use spaces as part of a name
parameter, enclose it in double quotes like this: "System Name with Spaces".
Parameters may be mandatory values, optional values, choices, or a combination.
place of the brackets and text inside them.
[parameter]. The [] square brackets indicate that an optional parameter may be entered in place
of the brackets and text inside them.
choice1 | choice2. The | indicates that only one of the parameters should be entered.The {} curly
braces indicate that a parameter must be chosen from the list of choices.
Values
This parameter is a valid IP address, made up of four decimal bytes ranging from 0 to 255.
ipaddr
The default for all IP parameters consists of zeros (that is, 0.0.0.0). The interface IP address of 0.0.0.0 is
invalid.
macaddr The MAC address format is six hexadecimal numbers separated by colons, for example
00:06:29:32:81:40.
areaid Area IDs may be entered in dotted-decimal notation (for example, 0.0.0.1). An area ID of
0.0.0.0 is reserved for the backbone. Area IDs have the same form as IP addresses, but are distinct from
IP addresses. The IP network number of the sub-netted network may be used for the area ID.
routerid The value of must be entered in 4-digit dotted-decimal notation (for example,
0.0.0.1). A router ID of 0.0.0.0 is invalid.
slot/port This parameter denotes a valid slot number, and a valid port number. For example, 0/1
represents slot number 0 and port number 1. The field is composed of a valid slot number
and a valid port number separated by a forward slash (/).
logical slot/port This parameter denotes logical slot number, and logical port number assigned. This
is applicable in the case of a port-channel (LAG). The operator can use the logical logical slot number,
and the logical port number to configure the port-channel.
2011 Fujitsu Technology Solutions
©
353
Hide quick links:
Table of Contents
